OSHA renews strategic partnership to reduce injuries, lost work time at Ford Motor Co. auto plants

Partnership includes UAW, ACH and MIOSHA in partnership with OSHA, Department of Labor

06/13/2011


OSHA administrator Dr. David Michaels has signed an agreement renewing OSHA’s partnership with Ford Motor Co., the United Automobile, Aerospace and Agricultural Implement Workers of America and Automotive Component Holdings LLC, and welcoming the Michigan Occupational Safety and Health Administration as a new partner.

“OSHA’s partnership with Ford and the UAW has helped significantly reduce the frequency and severity of worker injuries,” said Michaels. “The partnership is a win-win for management and labor. It contributes to Ford’s competitiveness in the global economy while protecting the safety and health of thousands of workers.”

The goal of this strategic partnership is to prevent occupational fatalities, injuries and illnesses at participating Ford Motor Co. and Automotive Component Holdings locations in Michigan, Ohio, Illinois, Missouri and New York.

Since 2000, OSHA has had a partnership with Ford and the UAW. ACH joined the partnership more recently. The partnership has resulted in a 74 percent reduction in total case incident rates and an 88 percent decrease in days away from work, restricted duty and job transfers, better known as “DART,” rates. In 2010, 75 percent of worksites participating in this partnership had DART rates below Labor Department’s Bureau of Labor Statistics industry averages.

Plants covered by this agreement under federal OSHA include: Chicago Assembly Plant and Chicago Stamping Plant, Chicago, Ill.; Kansas City Stamping Plant, Kansas City, Mo.; Buffalo Stamping Plant, Hamburg, N.Y.; Cleveland Engine Plants 1 and 2, Brook Park, Ohio; Lima Engine Plant, Lima, Ohio; Ohio Assembly Plant, Avon Lake, Ohio; Sharonville Transmission Pant, Sharonville, Ohio; Sandusky Plastics Plant, Sandusky, Ohio; and Walton Hills Stamping Plant, Walton Hills, Ohio.

Michigan plants covered by this agreement under state OSHA include: Dearborn Tool and Die Plant; Dearborn Truck Plant; Dearborn Diversified Manufacturing Plant; Dearborn Stamping Plant; Dearborn Engine and Fuel Tank Plant; Michigan Assembly Plant in Wayne; Woodhaven Stamping Plant; Livonia Transmission Plant and National PDC in Livonia; Van Dyke Transmission Plant and Sterling Transaxle Plant in Sterling Heights; Romeo Engine Plant; Rawsonville Parts Plant; Brownstown Parts Redistribution Center in Romulus; Woodhaven Forge Plant; and Saline Instruments and Plastics Plant and the Sheldon Road Plant in Plymouth Township.

www.osha.gov

 - Edited by Chris Vavra, Plant Engineering, www.plantengineering.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.