OSHA's top 10 violations worth reviewing

The top 10 citations issued by OSHA against construction and general industry seldom change, but they are always worth reviewing as the most frequently overlooked areas of compliance

04/01/2011


What gets the attention of OSHA regulators every year? They’re usually the same issues year after year. The top 10 citations issued by OSHA against construction and general industry seldom change, but they are always worth reviewing as the most frequently overlooked areas of compliance.

The following were the top 10 most frequently cited standards in fiscal year 2010 (October 1, 2009 through September 30, 2010):

  1. Scaffolding, general requirements, construction (29 CFR 1926.451)
  2. Fall protection, construction (29 CFR 1926.501)
  3. Hazard communication standard, general industry (29 CFR 1910.1200)
  4. Ladders, construction (29 CFR 1926.1053)
  5. Respiratory protection, general industry (29 CFR 1910.134)
  6. Control of hazardous energy (lockout/tagout), general industry (29 CFR 1910.147)
  7. Electrical, wiring methods, components and equipment, general industry (29 CFR 1910.305)
  8. Powered industrial trucks, general industry (29 CFR 1910.178)
  9. Electrical systems design, general requirements, general industry (29 CFR 1910.303)
  10. Machines, general requirements, general industry (29 CFR 1910.212)

The following are the standards for which OSHA assessed the highest penalties in fiscal year 2010 (October 1, 2009 through September 30, 2010):

  1. Fall protection, construction (29 CFR 1926.501)
  2. Electrical, general requirements, construction (29 CFR 1926.403)
  3. Safety training and education, construction (29 CFR 1910.21)
  4. Control of hazardous energy (lockout/tagout), general industry (29 CFR 1910.147)
  5. Machines, general requirements, general industry (29 CFR 1910.212)
  6. General duty clause (Section 5(a)(1) of the OSH Act)
  7. Excavations, requirements for protective systems, construction (29 CFR 1926.652)
  8. Lead, general industry (29 CFR 1910.1025)
  9. Grain handling facilities (29 CFR 1910.272)
  10. Ladders, construction (29 CFR 1926.1053)


No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.