Photoelectric sensor line has M18 housing

Wenglor photoelectric sensors are available for straight and angled reflex, retro-reflex and through beam sensors and are available in housing lengths of 35 mm and 50 mm.

12/11/2011


The sensors are available for straight and angled reflex, retro-reflex and through beam sensors and are available in housing lengths of 35mm and 50mm. Courtesy: WenglorWenglor has created a range of sensors in a plastic M18 housing which is distinguished by efficiency and economy – without skimping on high-tech features. The mechanical design is available for straight and angled Reflex Sensors, Retro-Reflex Sensors and Through Beam Sensors with cable or plug. With housing lengths of 35 mm (straight variant) and 50 mm (angled variant), the Photo­electronic Sensors are very compact and can be integrated into any application.

All of the modes of operation offered with the sensor range are equipped with an antivalent output, a potentiometer for adjusting switching distance and two diagnosis LEDs. The integrated LEDs indicate switching status, contamination and supply voltage, and are highly visible from any angle. Switching distance can be precisely adjusted to any application with the potentiometer which is protected against destruction due to overtwisting by means of a mechanical limit stop.

The mounting system included as standard equipment with the sensors allows for easy attachment ranging from integration into the system right on up to quasi-flush mounting. As a highly practical feature, the sensors can be fed through the opening and secured from either side. This simplifies and accelerates initial start-up, and reduces installation costs.

Wenglor Sensoric gmbh

www.wenglor.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 

See the Sensors Channel at controleng.com/sensors



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.