PIC microcontroller integrates 16-bit analog, data acquisition, USB, LCD

Microchip PIC microcontroller system on a chip integrates 16-bit ADC, 10 Msps ADC, DAC, USB, and LCD: Microchip PIC24FJ128GC010 family provides intelligent analog and very low power for portable medical and industrial applications. See system on a chip photos and diagrams.


Microchip PIC microcontroller system on a chip integrates 16-bit ADC, 10 Msps ADC, DAC, USB, and LCD: Microchip PIC24FJ128GC010 family provides intelligent analog and very low power for portable medical and industrial applications. Courtesy: Microchip TecMicrochip Technology Inc. (NASDAQ: MCHP), a provider of microcontroller, mixed-signal, analog and Flash-IP solutions, announced a new family of microcontrollers (MCUs), PIC24FJ128GC010, on Sept. 16. The family is an analog system on a chip that integrates a full analog signal chain, including Microchip’s first ever on-chip precision 16-bit ADC and 10 Msps 12-bit ADC, plus a DAC and dual operational amplifiers (op amps), along with eXtreme Low Power (XLP) technology for extended battery life in portable medical and industrial applications, the company said.

This combination of analog integration and low power consumption reduces system cost and noise, and improves the signal throughput in applications, such as portable medical monitoring devices, (blood-glucose meters and blood-pressure monitor), as well as industrial applications such as portable monitoring devices (voltage and current monitors, gas sensors, and high-speed sensor arrays), among others, according to the company.

In this before and after layout, Microchip shows saved board space from using the Microchip PIC24F integrated analog chip. Courtesy: Microchip Technology Inc.

The PIC24FJ128GC010 family includes an integrated LCD display driver that provides the ability to drive up to 472 segments with information-rich user displays that include scrolling alphanumeric banners. Integrated USB supports the uploading of clinical data for medical equipment, and can act as a service/data port for industrial equipment. Capacitive touch sensing is supported with an on-chip Microchip mTouch peripheral. The integration of a 16-bit ADC, USB, and LCD into one low-power MCU allows for very small form factor, battery-powered applications. The PIC24FJ128GC010 family represents a significant cost reduction over a multi-chip implementation, enabling lower noise, faster throughput, smaller printed circuit board (PCB) size (see before and after board layout diagram), and faster time to market.

“Designing precision analog circuits is a challenge. Microchip has made analog design easier with the launch of this latest intelligent-analog microcontroller family,” said Joe Thomsen, director of Microchip’s MCU16 Division. “We started with the customer’s end product in mind debugging the noise and communication so designers get consistent analog performance across applications. We also created a comprehensive starter kit on which our customers can build their software, hardware and sensors—drastically improving their development time by eliminating the need to design a board.”

Development support

The PIC24FJ128GC010 family is supported by the Microchip MPLAB Starter Kit for PIC24F Intelligent.Integrated.Analog (part #DM240015). The kit is focused on the family’s integrated analog to preserve signal integrity. It provides 95% of what designers need to develop a handheld analog prototype. All they need to do is add sensors, the company said.

The new PIC24FJ128GC010 MCU family is available for sampling and volume production. The PIC24FJ128GC010 (128 KB Flash) and PIC24FJ64GC010 (64 KB Flash) are available in 100-pin TQFP and 121-pin BGA packages. The PIC24FJ128GC006 (128 KB Flash) and PIC24FJ64GC006 (64 KB Flash) are available in 64-pin TQFP and QFN packages. Products are available through microchipDirect or through a Microchip authorized distribution partner.

Jason Tollefson, Microchip senior product marketing manager, advanced microcontroller and architecture division, shows the Microchip MPLAB Starter Kit for PIC24F Intelligent.Integrated.Analog, a development kit for the PIC24F “GC” family of 16-bit microco

Microchip Technology Inc. provides microcontroller, mixed-signal, analog and Flash-IP solutions, for low-risk product development, lower total system cost, and faster time to market for thousands of diverse customer applications worldwide. It is headquartered in Chandler, Ariz.

- Edited by Mark T. Hoske, content manager CFE Media, Control Engineering, mhoske(at)cfemedia.com.

Online extras

www.microchip.com/get/6T4J includes more information, including links to a video and presentation.


See more pictures below.

The Microchip MPLAB Starter Kit for PIC24F Intelligent.Integrated.Analog is a development kit for the PIC24F “GC” family of 16-bit microcontrollers, a family with advanced integrated analog capabilities, which reduces cost, lowers noise, and has faster th

Diagram: Microchip PIC24FJ128GC010 family integrates a 16-bit ADC, USB, and LCD into one low-power MCU with less cost compared to a multi-chip implementation, for lower noise, faster throughput, smaller PCB size, and faster time to market. Courtesy: Micro

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.