Plug-and-play doesn’t happen by luck

Automation equipment from multiple suppliers may not always play well together. When interconnecting devices, a little planning ahead can help ensure success.

03/12/2013


Automation equipment from multiple suppliers may not always play well together. When interconnecting devices, a little planning ahead can help ensure success.Have you ever worked on a project where several pieces of equipment from different manufacturers were purchased with the expectation that the equipment would just plug together and work? On small-scale items, that might be real possibility, but on a larger scale, such as an entire plant or a retrofit of a plant, assuming that everything will simply work can create serious problems. Success must be engineered. Once the mechanical issues are ironed out, there are multiple things to consider from a controls perspective, such as system integration for the different systems, control philosophy, and communication protocols, among other items.

For communication, most new platforms support multiple protocols so this is not as much of a problem. However, on the older platforms typically involved in retrofits, communication options are more limited, and either a universal communication protocol or a device for converting communication protocols must be found when bridging platforms. One of the most common universal protocols is Modbus. Several companies offer solutions for gateway platforms that can bridge between protocols for various SCADA packages using it as a common denominator. But even with Modbus you have to watch out for scan times and update rates. Just because one system is configured to read points based on change, it does not always get picked up on the other side due to differences in scan rates. When this occurs, you typically need to switch from a change-based update to a scheduled update on a set timeframe based on the requirements for the system.

For the control philosophy, someone must make sure that the controls on the fringe systems are covered and the operating requirements on each platform are met. An example of this would be the steam bypass controls on a combined cycle plant. The steam bypass controls connect the heat recovery steam generator (HRSG), the condenser, and the steam turbine. If one vendor supplies the HRSG and another vendor supplies the steam turbine, and there is an existing condenser to connect during a retrofit, there are several operating conditions and design requirements to consider before putting the system into operation. It is critical that all parties involved communicate during the design phase to avoid engineering in the field to make the systems work.

More of these types of projects are becoming popular as companies start replacing older systems. In order to execute these projects successfully, you must perform a large amount of research to determine the best way to integrate equipment. If your homework is performed up front, it will make everything go much smoother.

This post was written by Mike Robb. Mike is a senior engineer at MAVERICK Technologies, a leading system integrator providing industrial automation, operational support, and control systems engineering services in the manufacturing and process industries. MAVERICK delivers expertise and consulting in a wide variety of areas including industrial automation controls, distributed control systems, manufacturing execution systems, operational strategy, and business process optimization. The company provides a full range of automation and controls services – ranging from PID controller tuning and HMI programming to serving as a main automation contractor. Additionally MAVERICK offers industrial and technical staffing services, placing on-site automation, instrumentation and controls engineers.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.