PMA Business report sees a summer slump coming

Association blames global instability, lack of U.S. government action

06/15/2012


According to the June 2012 Precision Metalforming Association Business Conditions Report, metalforming companies expect a significant decline in business conditions during the next three months.  Conducted monthly, the report is an economic indicator for manufacturing, sampling 114 metalforming companies in the United States and Canada.

 

The June report shows that only 11% of participants anticipate economic activity will improve during the next three months (down from 24% in May), 57% predict that activity will remain unchanged (compared to 60% last month) and 32% report that activity will decline (up substantially from 16% in May).

 

PMA officials said that while business generally has been better than in 2011, concerns over domestic and global issues are creating concern. “PMA member companies have generally experienced growth in 2012 vs. 2011, with average orders for the period of January to April up 9% year-over-year and shipments up 11% over the same period,” said William E. Gaskin, PMA president. “However, the outlook expressed in the June 2012 Business Conditions Survey reflects the soft business conditions created by economic uncertainty related to the European monetary crisis, confusion in the United States about health care and tax policy (including the massive tax increases threatened at year-end), and the lack of leadership by the President and Congress in addressing our own looming debt crisis.

 

 “While politicians increasingly speak about the importance of a strong manufacturing economy, little concrete action has been taken to adopt pro-manufacturing policies or to reduce the cost of regulations,” he added. “Manufacturing continues to lead the modest growth in the U.S. economy, including consistent growth in jobs; however the recovery is definitely in jeopardy as reflected by PMA’s June report.  It is time for the President and Congress to set aside political interests and take concrete actions to support job growth, economic recovery and fiscal prudence.”

 

Metalforming companies also forecast a downward trend in incoming orders during the next three months, with only 15% anticipating an increase in orders (compared to 34% in May), 52% expecting no change (up from 46% in May) and 33% predicting a decrease in orders (up from 20%  last month).

 

Average daily shipping levels declined in June.  Thirty-one% of participants report that shipping levels are above levels of three months ago (down from 37% in May), 39% report that shipping levels are the same as three months ago (compared to 44% last month), and 30% report a decrease in shipping levels (up from 19% in May).

 

The percentage of metalforming companies with a portion of their workforce on short time or layoff increased to 14% in June, up from 10% in May.  The June figure is the same as it was one year ago.

 

The monthly Business Conditions Report has been conducted by PMA since 1979.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.