PMI surges to highest point in almost two years

ISM Report shows manufacturing index at 54.2%; year-end stall seems to be easing

03/01/2013


The economic acceleration since the beginning of the year continued in the manufacturing sector, as the February PMI Index from the Institute for Supply Management jumped to its highest level since June 2011. Institute of Supply Management logo. Courtesy: ISM

The 54.2% index reading for the February PMI was the third straight month of growth for the sector. The index climbed to its highest point since a 55.8% reading 20 months ago, and is up almost 9% since the index slipped below the 50% growth point to 49.9% in November 2012.

“The New Orders Index registered 57.8%, an increase of 4.5% over January's reading of 53.3%, indicating growth in new orders for the second consecutive month,” said Bradley J. Holcomb, chair of the Institute for Supply Management’s Manufacturing Business Survey Committee. “As was the case in January, all five of the PMI's component indexes—new orders, production, employment, supplier deliveries and inventories—registered in positive territory in February. In addition, the backlog of orders, exports and imports indexes all grew in February relative to January.”

Among the comments from survey respondents: 

  • "Automotive is still going strong, which allows budgeting for capital equipment." (Machinery)
  • "Overall business is good." (Food, Beverage & Tobacco Products)
  • "Starting to pick up after a slower than normal year-end." (Miscellaneous Manufacturing)
  • "More RFQs coming in than the past three months." (Nonmetallic Mineral Products)
  • "Workload is growing; need qualified machinists." (Fabricated Metal Products)
  • "Business seems to be on an uptick. The normal seasonal downturn for us has been much shorter and not as severe as in the past four years." (Furniture & Related Products)

The Last 12 Months:

A PMI in excess of 42.2% generally indicates an expansion of the overall economy. “The past relationship between the PMI and the overall economy indicates that the average PMI for January and February (53.7%) corresponds to a 3.6% increase in real gross domestic product on an annualized basis,” said Holcomb. “In addition, if the PMI for February (54.2%) is annualized, it corresponds to a 3.7% increase in real GDP annually.”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.