Post-Katrina: Rugged fiber-optic network is set to report through hurricanes

For levee and canal monitoring in post-Katrina New Orleans, U.S. Army Corps of Engineers installed a new monitoring system with help from Prime Controls, Sutron Corp., and Weed Instrument fiber-optic based communication modules.

12/04/2008


Weed Instrument EOTec 2000 Industrial Ethernet Switched Media Converters and Switches

Weed Instrument EOTec 2000 Industrial Ethernet Switched Media Converters and Switches provide fiber optic conversion to and from wire based Ethernet for long distance communications over multi-mode or single mode fiber optic cable.

For levee and canal monitoring in post-Katrina New Orleans, U.S. Army Corps of Engineers installed a new monitoring system with help from Prime Controls, Sutron Corp., and Weed Instrument fiber-optic based communication modules. Good engineering and the latest technology is helping keep New Orleans dry. The
The devastation that resulted from Hurricane Katrina prompted the Corps, which has responsibility over the city’s system of levees and canals, to install a new monitoring system on the 17th Street, Orleans Avenue and London Avenue canals. For that general contractor Prime Controls turned to real-time hydrological and weather monitoring system developer Sutron Corp . of Sterling, VA. Sutron Weed Instrument fiber optic based communication modules.

Weed Instrument fiber optic topologies include repeater, point-to-point, daisy chain, star, self healing ring and dual self healing ring.

Weed Instrument fiber optic topologies include repeater, point-to-point, daisy chain, star, self healing ring and dual self healing ring.

“The goal of this project was to monitor meteorological parameters. They wanted to monitor if a storm was coming through,” says Faisal Al-Mtwali, an electrical engineer with Sutron. “They also were monitoring the water level in the canals.”
Such information is vital if the operation of a canal’s pumps and gates are to be automatically managed by a supervisory control and data acquisition (SCADA) system. The control system needs data quickly, which is one reason why fiber optic communications were selected.
Another reason has to do with the far-flung nature of the operation. There are 12 stations in the project, scattered along tens of thousands of feet of canals. The runs are too long for any copper wire but well within the capabilities of a fiber connection.
Configuration

Sutron Monitor Datalogger

Sutron Monitor Datalogger is said to be a easy-to-use, affordable (&$1000) weather or hydro station logger with 16 measurements and equation processing.

Another critical selection criterion was low electrical power draw on the Weed modules. This becomes vitally important when the system goes into battery back up mode. If a hurricane were to hit and knock out region-wide power, having a low power draw would be an advantage. The system can
The system has operated since December 2006. Before that, there was no automatic way to bring
Since a great portion of New Orleans is below the water level of nearby Lake Pontchartrain, this lack of visibility increased the city's

Sutron Satlink2 Transmitter/Logger (SL2) has Voice Communications and can operate as a GOES Satellite Transmitter.

Sutron Satlink2 Transmitter/Logger (SL2) has

As part of the infrastructure improvements implemented after Hurricane Katrina, the Corps installed monitoring stations. Since these had to work no matter the conditions, they have redundant communications capabilities. The primary telemetry path for the SCADA system was over fiber optic cable running Modbus industrial automation protocol.
Products from Weed Instrument play a key role in this communication. “We use the 2C10, the electrical module interface, for the RS-232/RS-485 protocol,” says Al-Mtwali
The connection between SCADA, pumps, and remote gates has to be robust to
Another data telemetry conduit is through the GOES satellite, running a high data rate option to a geostationary satellite thousands of miles overhead. This path provides hourly transmission of 15-minute interval stage data of such measurements as water level, temperature, relative humidity, rainfall, and barometric pressure, as well as wind speed and direction.
The GOES link provides wide-area dissemination of the water level data, with the information transmitted to and monitored by personnel at the Corps' Vicksburg, MS, regional headquarters. This connection is extremely reliable, requiring no land lines or terrestrial repeaters.
It also can automatically sound an alert if a problem is detected, explains Al-Mtwali.

The final data route is through Iridium satellite phone modems, a slower and more costly link than GOES. One advantage that the Iridium channel offers is two-way voice and data communication, which can be important in a crisis. Iridium also offers a last ditch link, used if all else fails.
Because of the multiple channel setup, if the fiber breaks the station will still be logging and transmitting data. Indeed, so long as there is power and the antennas exist, the monitoring stations can continue to do their job. This information then helps the Corps do its job in ensuring that the levees and canals protecting New Orleans don’t fail.
To date, the system has not been subjected to a severe test;
The Corp offers a video with details on the Hurricane and Storm Damage Risk Reduction System .
The Corp also offers more information, photos and maps of the New Orleans canals and levees .
— Edited by Mark T. Hoske , editor in chief
Control Engineering News Desk
Register here .





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.