Power and design at National Manufacturing Week conference
National Manufacturing Week incorporates the Industrial Automation Show and related conference sessions of interest to component-minded people interested in power and design.
National Manufacturing Week incorporates the Industrial Automation Show and related conference sessions of interest to component-minded people interested in power and design. Most of the 322 conference sessions at NMW 2005 will be held 8 a.m. to 12:20 p.m. on the show’s four days to help most visitors go to conference sessions in the morning and visit the show floor afterward.
Design for No-Assembly: Applications and Design Methods;
New High Speed Fuse Size 5 for Protecting High Current Rectifiers;
Protective Devices Maintenance as it Applies to the Arc/Flash Hazard; and
Sizing and Selection of Generators for Backup Power.
Also, I’m moderating two conference sessions. These are:
“ Ethernet in the Manufacturing Enterprise ” to be held at 8:30 to 9:20 a.m. on March 7, and will include Mike Bryant, executive director of the Profibus Trade Organization , Katherine Voss, executive director of the Open DeviceNet Vendors Association (ODVA), and Markus Sandhoefner, of B&R Industrial Automation USA, representing Ethernet Powerlink Standardization Group (EPSG).
“ Position Sensing ” to be held at 8:30 to 9:20 a.m. on March 8, providing “feedback” on what the latest position-sensing technologies have to offer, including application information from automation system integrators: Scott Shaw, president, Automated Control Systems Inc .; Ken Brey, technical director, DMC Inc. ; and Sam Hammond, chief engineer, Innoventor Inc .
Click here to see the full program ; there’s a search engine at bottom of the Web page.
—Mark T. Hoske, editor-in-chief, Control Engineering, MHoske@cfemedia.com