Power modules for outdoor and liquid cooled power systems

TDK Corporation's TDK-Lambda PFE1000FA series of AC-DC power modules enable designers to utilize a single device containing power factor correction, regulation, and input-output isolation.

By TDK Corporation June 13, 2016

TDK Corporation’s TDK-Lambda PFE1000FA series of ac-dc power modules enable designers to utilize a single device containing power factor correction, regulation, and input-output isolation. These modules have been widely used in outdoor and liquid cooled power systems for fanless applications in the industrial, signage, and communications markets. Operating from a universal input of 85-265 Vac, the PFE1000FA models are available with nominal outputs of 12, 28, and 48 Vdc and can be adjusted +/-20% via a trim-pin. All the power modules can deliver full power with an operating baseplate temperature range of -40 to 100 C. An isolated module good signal, remote on/off, 12V standby output, over voltage, over current and over temperature protection is included on all models.

TDK Corporation

www.tdk.com 

– Edited by CFE Media. See more Control Engineering energy and power products.