Power supply demand to drive growth for semiconductors in 2013

The market will offer strong opportunities for some semiconductor manufacturers in 2013

01/28/2013


IMS Research (acquired by IHS, Inc.)Despite a largely flat market for power supplies in 2012, IMS Research (acquired by IHS, Inc.) is predicting that the market will offer strong opportunities for some semiconductor manufacturers in 2013. Its report, The World Market for Semiconductors in Merchant Power Supplies – 2012 analyses the opportunity for semiconductors in both the AC-DC and DC-DC power supply market and provides forecasts to 2016.

Although the total world market for semiconductors used in power supplies is forecast to grow at a fairly healthy 6.5% in 2013, growth opportunities differ widely by semiconductor product and by application. Strongest growth is predicted for MPU/MCU/DSP/DSC products at 35% in 2013. Although this is currently one of the smallest markets for semiconductors used in power supplies, it is projected to grow by $45 million from 2012 to 2016 owing to adoption of digital power and advanced power factor correction (PFC) techniques.

Associate Director of IMS Research’s power management and conversion group, Ryan Sanderson, commented, “Demands for greater efficiency and increased power density continue to drive opportunities for semiconductor vendors. The market for digital power alone is forecast to quadruple in the next five years, as a direct result of this. Many more opportunities exist, however, linked to legislation and design changes.”

Other growth drivers include the increase in demand for power supplies which use synchronous rectification at the output, a trend projected to account for a large part of the $80 million growth forecast for the power MOSFET market from 2012 to 2017. In addition, the combined market for AC-DC switching regulators (integrated FET) and switching controllers (external FET) is predicted to grow by $270 million in the next five years. This is driven in part by demand for more intelligent solutions in cell phone chargers to cope with requirements for “no-load power consumption” and strong demand from applications such as tablets and LED lighting.

Sanderson added, “2012 was a difficult year for many semiconductor vendors who sell into power supplies, with reduced demand from many sectors. Demand from end markets such as notebook PCs and industrial applications, which typically offer steady growth, was much weaker than average. Opportunities did exist, however, particularly in tablet PCs and the rapidly expanding market for LED lamps and luminaires. These opportunities are forecast to drive further growth in 2013 and beyond.”

The full report is available now from IMS Research and includes analysis of five separate power semiconductor discrete products, six separate power IC products and four other semiconductor categories.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.