Process engineer job satisfaction survey

Process engineers are stable and generally happy people who say they enjoy their work. The pay's not bad, too.

03/21/2011


As we emerge from the great recession, we asked process engineers how they feel about their jobs and how they weathered the downturn. All in all, the results were encouraging and suggest a high level of satisfaction for people in process industries. Responses came from all over the world, including Asia, Africa, Middle East, Europe, South America, and North America. Most seemed willing to give their names and companies, although we’re not so sure about Mr. Bubba and Mr. Peon.

Almost all respondents are degreed engineers (92%), although the specific discipline varies. The largest group was electrical and electronic engineers at 40%. Chemical engineers accounted for 28%. Mechanical engineers and other subcategories comprise the balance. Most are responsible for direct interaction with the process and equipment. (See chart.) The largest single category was process improvement and optimization, followed by instrumentation and control.

Salaries cover the full range with 20% in the <$30,000 category. (See chart.) This group was typically the least experienced and outside of North America. Generally there was a strong correlation between experience and salary. All those who reported cracking the six-figure barrier (more than one-third) had at least 13 years in the business. Ironically perhaps, the 16% who reported times of unemployment since 2007 were also all in the more-than-10-year category. Time off ranged from three to 20 months.

The level of salary change over the last year varied evenly across the pay spectrum, although the news is generally good. Only 20% reported a decrease, 36% said that it stayed the same, and 32% said it went up. Team headcount stability followed similar numbers, with 80% reporting no change or an increase.

Satisfaction numbers are high with nearly half reporting that they love going to work every day. (See chart.) Another third think it’s OK. That high satisfaction also correlates to experience, but one respondent with 20 years reported that he would leave given the chance to pursue design work. His reasons cited a lack of respect and unrealistic expectations from management.

When asked, “What could make your job more satisfying?” respondents gave a wide range of answers. Some mentioned bureaucratic aggravations or management interference, such as, “I love what I do, but I do not like the current office politics. The many facets of what I do keep things fresh and interesting. It keeps me getting up in the morning; however, the petty office politics that have developed recently are stifling!” Another reported, “While safety is paramount, the daily burden of complying with new safety mandates, safety audits, etc., is sapping my energy.”

Some suggested they could do a better job if given the freedom to try new things. For example, “More time/projects to experiment with the capabilities of new products and how they could fit into our process.” And, “More free time for independent research and projects.”

The respondent who reported the longest time in the business at 42 years, all at the same company, summed up his situation with, “I enjoy doing technical work. The more challenging or never-been-done, the better.”

Peter Welander is content manager for Control Engineering. Reach him at pwelander(at)cfemedia.com.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.