Process Standards: Groundbreaking savings expected at Bristol-Myers Squibb Devens plant

In new and existing installations, implementations show that savings from ISA-88 extend way beyond its original use for batch control systems, including at a new Bristol-Myers Squibb Devens, MA, facility, which breaks ground today, May 2.


Baltimore, MD —In new and existing installations, implementations show that savings from ISA-88 extend way beyond its original use for batch control systems, including at a new Bristol-Myers Squibb Devens, MA, facility, which breaks ground today, May 2. Use of standards offers savings in manufacturing operations, makes training easier, and enhances regulatory compliance. The pharmaceutical company explained anticipated benefits in a May 1 keynote presentation here at WBF 2007 North American Conference a manufacturing automation standards meeting, running April 30-May 3.

Easier communication is among benefits of using standards, says Dr. Paul McKenzie, vice president and general manager of LSCC, technical operations, worldwide medicines group, Bristol-Myers Squibb . At the new BMS large-scale multi-product bulk biologics manufacturing facility, McKenzie is using ISA-88, ISA-95, and ASTM E55 standards to cut work out of processes, tying together manufacturing and laboratory operations and analysis. McKenzie says phase 1 at the Devens site includes 400 jobs, and a $750,000 investment for six 20,000 L bioreactors, with commercial operation expected by end of 2010.

For pharmaceutical and other manufacturers, use of automation standards provides a basis for change management, quality through consistent recipe management, and qualification management, with one version of the truth, more direct electronic batch records and electronic signatures, and better highlighting of process exceptions.

ISA-88 was originally for Batch Control Systems , but Control-Enterprise Integration ; and E55, from ASTM Committee E55 on Pharmaceutical Application of Process Analytical Technology , provides a “new thought path for validation,” according to McKenzie.

E55 separates validated patient-related processes and products from other requirements. “At end of day, we need to focus validation on patient related processes and do good engineering practices on the rest,” McKenzie says. Generally, he says, pharmaceutical firms have a paper-driven challenge. They need to move from:

Use of standards at BMS, especially with new automated laboratory and analytical services will help eliminate “sneaker net,” reduce phone calls, and ensure automated setup prior to sample arrival. While research people may see ISA-88 as limiting, its use means better data mining, analytics and modeling tools, and better management of parameters.

With use of lots of specialized equipment, drug development laboratories often appear as a separate organization from manufacturing operations, even within the same company. “The analytical space can have a lot of expensive equipment divorced from what’s going on in the rest of the facility, generally creating an IT nightmare,” McKenzie says.

Prompting chuckles among attendees, McKenzie described himself as a “friendly sort of person who encourages colleagues to have a beer at the bar with Dan and Pam,” that is, ensure that the facility uses:
-BER, batch execution recipes;
-BAR, batch analytical recipes;
-DAN, distributed analytical network; and
-PAM, process analytical manager.

In pharmaceutical facilities, McKenzie says, close to $1 billion have been spent on enterprise resource planning (ERP) and supply chain investments. In contrast investments in plant floor and laboratory automation, which could help ERP software work more effectively, have been under funded, in his view.

Plant floor has a lot to teach labs, he suggests; “Rather than go to the fifth decimal point on plant floor, I’d rather go to the first decimal point in the lab.” Shared software libraries and common interface expectations also would help a lot.

For more Control Engineering articles explaining benefits of automation standards, click here .

--- Control Engineering Daily News Desk
Mark T. Hoske , editor in chief

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Make Big Data and Industrial Internet of Things work for you, 2017 Engineers' Choice Finalists, Avoid control design pitfalls, Managing IIoT processes
Engineering Leaders Under 40; System integration improving packaging operation; Process sensing; PID velocity; Cybersecurity and functional safety
Mobile HMI; PID tuning tips; Mechatronics; Intelligent project management; Cybersecurity in Russia; Engineering education; Road to IANA
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
click me