Product Showcase | December

01/04/2007




Visit www.csemag.com for industry news and features
December 2006

Special Advertising Section Dear Reader,
Here is the next edition of Consulting-Specifying Engineer's product and system solutions showcase.

Featured Products


NEW FROM E-MON D-MON!
Load Control Option for Energy Management!

Managing energy has never been easier! Many industrial facilities wantenergy monitoring and control capabilities but do not have thefinancial or personnel resources to manage a full-scale load managementsystem. The E-Mon D-Mon Class 3000 meter with load control option isdesigned to operate at user selectable high and low set pointsproviding users with the capability to reduce electrical demand byshedding loads or activating a local generator. The low kW limit pointallows the load to be returned to normal operating power independentlyas pre-set parameters are met. For details, contact E-Mon at (800)334-3666 or Click here .



Cleaver-Brooks’ E+Plus Stack Economizer
Cleaver-Brooks’ new CB Packaged E+Plus Stack Economizer saves energy dollars and reduces emissions. The versatile design allows for multi use applications of steam and hot water boilers from 150-2200 HP. Features include removable tubes and internal bypass. Available for new or existing boilers. Click here.

 

 



Big Ass Fans for Industrial and Commercial Buildings
Big Ass Fans Click here.



Controlled Power Emergency Lighting Inverter
Meeting the NFPA 101 and NFPA 111 standards, Controlled Power Company's UltraLITE "Model ELU" emergency lighting inverter is considered "Life Safety Equipment". This UL 924 listed inverter provides uninterrupted,regulated, continuous sinewave output for use with "normally on" lightingfixtures and exit lamps, as well as standby output for use with "normally off" emergency lighting fixtures.




You have received this free product showcase because you are a qualified subscriber to Consulting-Specifying Engineer magazine, you are a member of an accredited industry association, or you have requested this newsletter. If you do not wish to continue receiving this newsletter, please unsubscribe by following the instructions below:

To subscribe, click here
If you have any problems unsubscribing, please send a request to eletters@reedbusiness.com .

Please distribute this newsletter freely; however, we ask that you not change its contents.

To Advertise:
Stephanie Grammens Stephanie.grammens@reedbusiness.com
630-288-8019

Alternate Unsubscribe:
Send a request to RBI Online Support Team, 2000 Clearwater Drive, Oak Brook, IL 60523
(Fax: 630/288-8782)

Customer Service:
E-mail eletters@reedbusiness.com

Sign up for a FREE subscription to Consulting-Specifying Engineer magazine.
View our Privacy Policy.






No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.