Proximity Sensing Via Wireless Network

A manufacturer of railcar moving equipment needed to integrate wireless technology that could “withstand extreme temperatures, dirty environments, high vibration, and three shifts of operation,” says Brad Goldbeck, a Calbrandt Inc. engineer. Calbrandt is an international original equipment manufacturer of railcar indexers, movers, and gate openers based in Delano, MN.

08/01/2008


A manufacturer of railcar moving equipment needed to integrate wireless technology that could “withstand extreme temperatures, dirty environments, high vibration, and three shifts of operation,” says Brad Goldbeck, a Calbrandt Inc. engineer. Calbrandt is an international original equipment manufacturer of railcar indexers, movers, and gate openers based in Delano, MN.

 

ONLINE extra , below, includes links to more than 30 wireless resources.

Requirements: rugged, no power

In this application, Calbrandt's axle mover, capable of pulling up to 75,000 lb, uses four 15-ft cylinders that extend underneath the train car carriage. Train car distribution centers are extremely harsh and are subject to high traffic volumes, which make running cables impossible. Another hurdle is that there is no power available on Calbrandt's axle pushing system. Prior solutions required a long-range photoelectric sensor to be installed wherever power was available, often at least 50 ft from the rail car sensing location. This distance caused the sensor to be affected by weather and other environmental factors. Operators responsible for these processes are constantly seeking ways to be more efficient and decrease the time between unloading and loading each railcar, making wireless solutions with more reliable sensing capabilities a popular new choice. Calbrandt chose the Banner Engineering SureCross Wireless Network DX80 Gateway and FlexPower Node.

Moving rail cars

A railcar wheel triggers the trip arm, which actuates the limit switch connected to a SureCross FlexPower Wireless Node, which, in turn, signals the “high dog” or pusher arm to rise. This action moves the railcar forward to the next loading/unloading station. The gateway—or wireless network controller—is located outside of the axle sensing area.

Range from the gateway to the node is often less than 100 ft, making signal interference a possible hindrance. To decrease radio frequency traffic and thereby increase the system's dependability, one gateway was used with multiple nodes—each employing frequency hopping spread spectrum (FHSS) technology with bidirectional transceivers in each device for acknowledged data transmission. The network also uses time division multiple access (TDMA) slots to guarantee bandwidth to each node, improving communication reliability.

The Banner Engineering FlexPower battery module powers the wireless node for approximately five years based on actuation frequency. This allows for the sensing device to be installed on the track at the sensing location. For Calbrandt, the SureCross system resulted in more dependable tripping of the high dog arm than its previous use of a long-distance photoelectric sensor.

“We no longer have to depend on cable carrier systems or high-maintenance sensors to locate railcar trucks,” Goldbeck said. “Engineers at Banner worked with us to customize their product to meet our specific power requirements. As a result, we have had great success and fewer maintenance issues.”

SureCross Wireless Network has a proprietary Radio Frequency (RF) design and bidirectional Rx/Tx communications to facilitate monitoring and control; devices also can be powered by 10-30 V dc power or solar power.

This type of system also is used often at ports and grain handling facilities.



ONLINE extra
Wireless Communications for Industry





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Intelligent, efficient PLC programming: Cost-saving programming languages are available now; Automation system upgrades; Help from the cloud; Improving flow control; System integration tips
Smarter machines require smarter systems; Fixing PID, part 3; Process safety; Hardware and software integration; Legalities: Integrated lean project delivery
Choosing controllers: PLCs, PACs, IPCs, DCS? What's best for your application?; Wireless trends; Design, integration; Manufacturing Day; Product Exclusive
PLCs, robots, and the quest for a single controller; how OEE is key to automation solutions.
This article collection contains several articles on improving the use of PID.
Learn how Industry 4.0 adds supply chain efficiency, optimizes pricing, improves quality, and more.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again