'Radical Solutions’ Deliver Rewards

For the past 13 years, TEC Engineering of Wichita, KS has been working with a major salt producer to completely overhaul its networking, controls and software technologies. Replacing a disparate collection of relays and single-loop controllers with a fully integrated PLC-based control system, TEC is helping the company improve the efficiency and operation of its evaporation, dry salt, and packa...

12/15/2007


At A Glance

 

  • Early Ethernet adoption

  • Rapid ROI

  • Increased productivity and reduced costs

For the past 13 years, TEC Engineering of Wichita, KS has been working with a major salt producer to completely overhaul its networking, controls and software technologies. Replacing a disparate collection of relays and single-loop controllers with a fully integrated PLC-based control system, TEC is helping the company improve the efficiency and operation of its evaporation, dry salt, and packaging processes.

One of the motivating forces behind the overhaul was that each plant location had followed its own path toward achieving company-encouraged efficiency and productivity gains. This created an environment of multiple, unmanageable control systems, higher implementation costs, and little or no sharing of resources between locations. Even transferring personnel from site to site was hampered by lack of consistency.

Creating a unified approach across the entire enterprise required TEC Engineering to develop solutions which were, at the time, considered somewhat radical. The client assembled an automation team comprised of representatives from all areas of the company, including both plants and mines, to ensure that the solution would be embraced across the entire organization. The first order of business: to standardize on a common communication and automation architecture. After much research and a complete “risk vs. reward” analysis involving both the plant operations and information technology (IT) departments, the team decided that upgrading all plant networks to a standard Ethernet architecture would be TEC’s first priority.

This was in 1994, and choosing an Ethernet communications architecture for an industrial network was a very aggressive decision. Ethernet was still considered a front-office technology, and bringing plant operations and IT departments together to agree on an Ethernet-based approach was critical.

Once the communication infrastructure was in place, the next step was to develop a controller/HMI hardware strategy. This too needed to be a team decision, as the choices would become standard across the enterprise. After an exhaustive evaluation process, TEC recommended and the client approved Rockwell Automation PLCs and Intellution (now GE Fanuc) HMIs connected directly to the Ethernet backbone.

For the next decade, TEC worked on automating each location’s operations, reducing the need for operator supervision in many areas from several individuals to just one. Operators could even log in to remote HMI stations using a personal digital assistant (PDA) and off-the-shelf remote access software. The resulting productivity improvements and reduced headcount simultaneously increased the client’s yearly salt output and lowered operating costs.

Streamlining the automation system has simplified maintenance and upgrade operations as well. All changes to the approximately 200 PLCs and 150 HMI stations can now be made directly from TEC’s main office. As a result, TEC can remotely handle all operating system patching, address security measures, and perform license reconciliation for the HMI stations.

The client has also benefited from the standardization of the control systems by reducing purchasing costs and simplifying operator training. Transferring personnel between locations no longer results in lost productivity. Re-using computer code has reduced implementation costs, which has enabled the client to achieve a timely net return on investment.

TEC is currently tasked with standardizing the approximately 20 packaging systems across all plants in order to measure, monitor and improve overall equipment effectiveness (OEE) using software tools from Informance International. Ensuring that the client retains its competitive advantage, TEC has also instituted a technology advancement team to determine how to get the most out of the automation systems that are in place, as well as to evaluate which new technologies can be added to further enhance productivity and process improvements. For example, the team has recently added a data historian and associated dashboard tools from OSIsoft, delivering an opportunity to gain greater insight into the day-to-day operation of the plants and the business as a whole.


ONLINE

www.tecsystemsgroup.com

www.rockwellautomation.com

www.gefanuc.com

www.informance.com

www.osisoft.com





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.