Rendering Plant Keeps Running During Control System Upgrade

Automation integrator case study: Integrated architecture delivers needed alarm logging and reporting capabilities.

12/06/2011


An Ethernet-based network and architecture allows the rendering plant to monitor and report on its operations in real time. Courtesy: I2RA rendering plant processing million of pounds of waste animal tissue per week needed a complete control system overhaul, with no downtime. Rendering converts waste tissue into stable value-added materials.

The plant works two shifts a day, accepting shipments from multiple processing plants. The fact was the animal tissue would arrive at the door whether or not the rendering plant was running. It had nowhere else to go. What’s more, spare parts for some of the control-system components in use were no longer available; the system had no redundancy or real-time reporting; and there was only one support person, stationed at a remote location.

The project participants agree that teamwork among plant, corporate, systems integrator, and electrical subcontractor personnel helped make the project a success. The upgrade included use of a modern information architecture, positioning the plant for greater use of information technology in the immediate future.

PLC I/O panel replacement

Today’s rendering plants need a reliable architecture that includes alarm and event data logging, and that delivers reporting needed for plant optimization.

Rendering plant continues to run through a process control system upgrade. Courtesy: I2RPhysically, the existing system included two four-door panels packed with nine vintage eight-slot racks and 64 I/O cards all controlled by a single processor. Two remote panels brought the system to 77 I/O cards. The cards themselves and the wiring were “vintage” and, having served well, were due for replacement.

Dallas-based I2R, a system integrator, contracted to supply all of the PLC I/O panels, programming and design, on-site electrical contractor supervision, and on-site start-up. The upgrades were divided into five sections, each to be installed during a weekend downtime window. Each window was from noon Saturday to 9 a.m. Monday morning—just 45 hours. The project manager was to conduct weekly conference calls with corporate and plant personnel.

It wasn’t possible to start by removing the old panels and installing the new ones. Instead, a nearby lab room was used to house the new panels, with pull boxes installed above them so that new wiring could be run to the plant floor from the panels. The technology employed included the following:

  • Schneider Modicon Quantum fully redundant central processing units (CPU)
  • Uninterruptible power supply (UPS) backup for each processor
  • Wonderware ArchestrA system platform
  • Redundant servers and network switches

I2R held a factory acceptance test four weeks prior to start-up and a software simulation three weeks prior. Operators and supervisors were able to interact with the system and ask questions, eliminating surprises and saving time.

Workflow for rendering begins outside the plant. Courtesy: I2RNew wiring and conduit were run while the plant was running. New conduit and single-conductor wiring replaced cable tray with tray cable. Once the new system was online, the old tray and tray cable were removed.

“The teamwork couldn’t have been better,” said the I2R project manager. “The plant worked very hard to give us the biggest downtime window they could. The contractors and software team were ready.”

Six start-up weekends had been planned, but that number was reduced to five because of the preparation work of the plant and contractor in prebuilding and testing motor control center (MCC) buckets. “The plant made the buckets available, saving time and money because the rebuilds were done on straight time rather than overtime,” the project manager said.

The upgrade has improved operations at the rendering plant, which has experienced no unplanned downtime in the three months following work completion. Remote support is online and development of business-intelligence dashboards is being planned.

Jerry Smith is president, Integrity Integration Resources (I2R), A Cates Company.

www.i2r.com  

www.wonderware.com 

www.modicon.com 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.