Report from Hannover: Looking for an attendance bump at Hannover Fair

Day 2 at the 2009 Hannover Fair could be a pivotal one for this year’s event. Day 1 attendance, less than last year, was impressive by just about any other standard in the U.S. The economy remains a concern for this year’s event.

04/21/2009


On location at Hannover Fair

Control Engineering editorial director David Greenfield, Consulting-Specifying Engineer editor Michael Ivanovich, and Plant Engineering editor Bob Vavra will be reporting from Hannover Messe this week on the new ideas and new technologies from the 2009 event.
Monday
- Flying penguin, innovations, efficiency
- Phoenix Contact shows new networking, safety relay, junction box
- Report from Hannover: Daily Innovation Focus
Tuesday
- Wind in the sails for Hermes Award winner
- Looking for an attendance bump at Hannover Fair
- Voice of youth at Hannover Fair
Wednesday
- Buzzwords include 'Pleasantly surprised'
- Product focus is on innovation, energy, says Siemens executive
- Daily Innovation Focus: sensors, Ethernet switches, safety, controllers
- World Energy Dialogue says lead environmentally to succeed
Thursday
- New SEW system designer packages, stainless steel gear motor
Friday
- New Beckhoff automation hardware, software
- Daily Innovation Focus: explosion-proof sensors, efficiency certification

Search atop related topics, atop www.controleng.com.

Hannover, Germany – Day 2 at the 2009 Hannover Fair could be a pivotal one for this year’s event. Day 1 attendance, while impressive by just about any other standard in the U.S., was down noticeably from last year. That show preceded the sharp drop in the economy which has fueled so much concern at this year’s event.
Solid traffic, busy product managers
In major automation booths such as ABB, Phoenix Contact and Siemens, traffic has been constant and solid, with product managers staying busy at all times. Still no one is suggesting that the opening day traffic would signal that the fair would attract the anticipated 250,000 attendees
Exports for manufacturing
Every major political and business leader speaking at this year’s show has acknowledged the economic challenges, but all have encouraged a continued outreach to exports and growth for the manufacturing sector.
Fair organizers Deutsche Messe and the b2fair European networking initiative are actively promoting international partnerships at the fair. International partnerships
"Companies have realized that now is the time to seek out the opportunities afforded by international partnerships," says Jürgen Schäfer of Handwerk International, one of the co-founders of b2fair.
Concerned about manufacturing economics? Also read, from Control Engineering : Economy:

Several indicators suggest growing optimism among manufacturers

.
– Bob Vavra, editor, Plant Engineering
Edited by Mark T. Hoske , editor in chief, Control Engineering News Desk, www.controleng.com
Register here to select your choice of free eNewsletters.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.