Report: SCADA systems under siege

A new report details trends that may lead to improvements that will help to protect a system from attack.

09/20/2011


With the vulnerabilities in SCADA systems, which are the most prevalent control systems in the water/wastewater sector, it has become clear a successful cyber attack could compromise control systems.

These systems integrate distributed electronic devices and networks to help monitor and control purification and distribution of clean water infrastructure. These same control systems communicate with a multitude of dispersed devices and various information systems that can expose these systems to malicious cyber attacks.

With the recent notice of vulnerabilities in SCADA systems, it has become clear a successful cyber attack could compromise control systems and disrupt the availability of clean water or result in sanitary sewer overflows (SSO).

The RISI database and report contains 25 confirmed water sector incidents occurring between 1998 and 2010, with the number of incidents increasing substantially in the last few years. While not very many companies will report an incident, this analysis gives a strong indication of events that are happening in the industry.

There is strong evidence the incidents reported are proportional to the total spectrum of cases.

The report found more than half of incidents in the water sector (13 of 25) were the result of unintentional control/SCADA system failure.

Take the Torrens Lake incident. Faulty software caused the gates of the Torrens Weir to open without warning. The gates remained open for about two hours draining millions of gallons of water from the lake in South Australia. An investigation revealed alarms that would alert remote operators of a malfunction ended up muted for some reason. Torrens Lake officials purchased the faulty software from Ottoway System Integration, an Adelaide, Australia-based firm which went out of business only days after the incident. There was no evidence of foul play.

The end result was the Torrens Lake ended up drained. Water levels dropped by more than two meters, or six feet. The incident caused a problem for businesses that relied on the lake.

The recommended mitigation from the report was for companies to review the functional safety of system design.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.