Rethinking conventional wisdom on manufacturing

With the conventional wisdom about manufacturing blown to bits by the scope and depth of the 2009 recession, ARC Advisory Group president Andy Chatha said there needed to be a new paradigm as manufacturing tries to move forward. “Most of us have been doing a lot of rethinking in the last year or so,” said Chatha at the opening of ARC's World Industry Forum in February in Orlando.

03/01/2010


 

 

 

With the conventional wisdom about manufacturing blown to bits by the scope and depth of the 2009 recession, ARC Advisory Group president Andy Chatha said there needed to be a new paradigm as manufacturing tries to move forward.

 

“Most of us have been doing a lot of rethinking in the last year or so,” said Chatha at the opening of ARC's World Industry Forum in February in Orlando. Chatha spoke to one of the largest gathering of manufacturing industry suppliers and leaders in the past three years. The three-day event covered issues including operational excellence, asset lifecycle management and cyber-security issues.

 

For Chatha, though, the recovery starts by pulling together the disparate parts of the manufacturing operation by using technology and management to build greater collaboration throughout the enterprise.

 

“Collaboration through all different departments is really important to come upon with new breakthrough ideas,” Chatha said. “Even though business issues haven't changed much in the last few years, the intensity has grown.”

 

Oracle's partnership with Mitsubishi Automation that was announced at the Forum is an example of collaboration between the enterprise systems and the plant floor equipment to drive greater, more seamless knowledge exchange. Some of it is encouraging collaboration throughout the people in the enterprise. This is more challenging than connecting a thousand nodes to the network, because nodes generally don't create a ruckus. After energy management, change management is a critical issue for manufacturers.

 

“Most people are familiar with a physical asset, but you need people to run them,” Chatha added. “Most important, you need right information at the right place at the right time. Collaboration is not just for people. It has to happen for devices as well.”

 

There were other issues that came out of this year's ARC World Industry Forum:

 

1. Energy: More than anything else, suppliers are looking at ways to help customers save energy costs because plant managers are being incented and challenged to manage these costs. The technology to manage costs is in place. With people costs flat and plants still looking for new ways to leverage cost savings, energy management is the logical place to start.

 

2. The importance of people: Asked at the opening of Tuesday's session what the key issue they face is; 26% of the audience said workforce development and the skills gap; 25% said systems and technology; and 20% said asset management.

 

3. There is budding optimism: Most suppliers agree that the fourth quarter of 2009 was better. It was better than 2008, of course, but it was better than they expected. Michel Crochon, executive vice president of Industry for Schneider Electric, noted that the signs of real growth will be when the OEM business starts to accelerate. Right now, the projects being driven have a good deal to do with the global stimulus packages. When that starts to translate into expanded projects will be when the recovery starts to take a foothold.

 

 

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.