Retrofit digital X-ray rapid growth signals advent of modular era

Rapid growth in the retrofit flat panel detector (FPD) market is predicted to signal the start of a new era in “modular” X-ray for general radiography.

07/09/2012


Rapid growth in the retrofit flat panel detector (FPD) market is predicted to signal the start of a new era in “modular” X-ray for general radiography, according to a new report from InMedica (www.in-medica.com), part of IMS Research, recently acquired by IHS Inc.

The recent release of new “retrofit” solutions has re-invigorated the market, with revenues for retrofit flat panel detectors forecast to grow more than 250% by 2016. While digital FPD technology is not new, the introduction of wireless flat panel detectors in 2008 demonstrated the potential for more flexible general radiography X-ray solutions. However, concerns regarding panel damage and security, paired with global economic challenges, slowed uptake.

The recent surge in demand for retrofit and wireless flat panel detector X-ray solutions demonstrates users concerns have been satisfied. Furthermore, continued penetration will usher in the start of a new era in general radiography X-ray: the “modular” approach.

The recently released second generation systems provide purchasers far greater flexibility and choice of rad-room X-ray configuration. Retrofit digital flat panel detector solutions also provide the added advantage to healthcare providers of lengthening the life-span of existing analogue X-ray equipment, while still maximizing the workflow and efficiency benefits of digital technology.

“The impact of wireless digital flat panel detectors so far is relatively low, with the majority installed in mature healthcare markets already well equipped with digital X-ray equipment” commented Stephen Holloway, senior analyst at InMedica. “However, strong competition in the flat panel market is driving price erosion of 7-10% annually, so these products will soon be more accessible to healthcare providers in emerging regions as well.”       

It is in regions such as Latin America, Africa and Southeast Asia where modular general radiography X-ray systems also make most sense. Sharing of wireless panels between rooms or systems can have significant cost benefits for healthcare providers with limited budgets. Retrofitting also limits the need to purchase brand new systems, allowing use of digital X-ray at a third of the cost of a new digital system.

“Shipments of retrofit flat panel detector systems in emerging regions are forecast to grow tenfold in the next five years,” continued Holloway. “Assuming price erosion continues at the projected rate, the cost difference between computed radiography and wireless FPD will narrow. This will make flat panel systems even more attractive for healthcare providers, sustaining long-term demand.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.