RFID controller with CC-Link

Pepperl+Fuchs' IC-KP2-2HB18-2V1D IdentControl compact RFID Controllers feature CC-Link communication, which is used often with Mitsubishi PLCs.

04/04/2012


Pepperl+Fuchs' IC-KP2-2HB18-2V1D IDENTControl compact RFID Controllers feature CC-Link communication, which is used often with Mitsubishi PLCs. Courtesy: Pepperl+FuchsPepperl+Fuchs introduced the IC-KP2-2HB18-2V1D IdentControl compact RFID Controllers with CC-Link communication. CC-Link is a common upper-level bus system used almost exclusively by Mitsubishi PLCs. These CC-link RFID controllers also support CC-Link V2. This functionality facilitates extended cyclic settings resulting in a large data map, making it easier and faster to read and write large amounts of information to the RFID system. These IP67 controllers are fully compatible with any Pepperl+Fuchs RFID read head for low frequency (125 kHz), high frequency (13.56 MHz) or ultra high frequency (915 MHz) operation.

“This two-head controller communicates to both read/write heads simultaneously. It also incorporates a new advanced RFID protocol that provides positive feedback to the user when a new tag has arrived, and allows for large read/write data blocks that are limited only by the read/write head's internal memory size,” said Tim Cicerchi, Product Manager, Pepperl+Fuchs.

Pepperl+Fuchs RFID controllers also have powder-coated zinc alloy housing, which makes them suitable for rugged situations. M12 connectors facilitate quick connection of the read heads, power, CC-Link in, and CC-Link out cables. A Y cable accessory is available that enables the CC-Link RFID controllers to be daisy chained and hot swappable without disturbing other CC-Link devices on the network. Also, a terminator is available for applications where the CC-Link RFID controller is the last device in line.

Pepperl+Fuchs

www.pepperl-fuchs.us 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 

controleng.com/networks



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.