Rockwell Automation reworks production systems globally

Using its own products in 20 production facilities globally, Rockwell Automation is implementing SAP enterprise resource planning (ERP) and Rockwell Automation software, replacing disparate customized, homegrown manufacturing execution systems that previously reported to as many as 5 ERP systems, at one location. Improvements are seen across the supply chain with 4%-5% gains in productivity per year expected, the company representatives said at the RSTechED USA conference.

06/17/2014


Frank Kulaszewicz (right), senior vice president of architecture and software, and Robert Murphy, vice president of operations, both Rockwell Automation, gave the first-day executive address at RSTechED 2014 USA, discussing the journey to the connected enIn 20 production facilities globally, Rockwell Automation is implementing SAP enterprise resource planning (ERP) and Rockwell Automation software, replacing disparate customized, homegrown manufacturing execution systems that previously reported to as many as five ERP systems, at one location.

Frank Kulaszewicz, senior vice president of architecture and software, and Robert Murphy, vice president of operations, gave the first-day executive address at RSTechED 2014 USA, discussing the journey to a connected enterprise, the enabling tools, and how they were used. They spoke at RSTechED, the 17th Rockwell Automation software-focused technology conference, this year with a record 1,900 expected registrants. The show goes on the road with stops globally, after this week.

Digital enterprise

In the quest for the interconnected enterprise, many customers are farther along than they might think, Kulaszewicz said. Once music moved from LPs, 8 tracks, and cassettes, to CD, it wasn't so difficult to move digital files to the cloud for access wherever and whenever needed. Now devices can access music digitally anywhere.

In any plant, it is not just about the data-integrated control and information matter in a plant. Assets and devices are becoming smarter and more interconnected via the Internet, adding value.

Cisco said Internet of things (IoT) creates $14 trillion of value. About 27% is in the industrial space, a $4 trillion incentive to increase productivity.

In the quest for the interconnected enterprise, many customers are farther along than they might think, said Frank Kulaszewicz, senior vice president of architecture and software, at RSTechED 2014. Courtesy: Control EngineeringKulaszewicz said that Rockwell Automation's Integrated Architecture platform enhancements include more than 50 new product introductions that deliver a smarter information infrastructure. The Logix platform is the center of that and has been out for nearly a decade, he said. It is getting a lot smarter, more scalable, more powerful, more accessible, and better connected. Connecting assets increases complexity, and people just want things to work. Logix was built for communications (it was originally introduced as a communications server), he said, and the latest communication embeds standard unmodified Ethernet for maximum connectivity.

Studio 5000 software provides system organization, library management, modular automation, actionable info, system security, and other functions, he said.

Lack of connectivity

Less than 14% of manufacturers in the U.S. have machines tied to enterprise networks, Kulaszewicz noted, perhaps as a result of hanging on to automation for too long. The PLC5 line is more than 30 years old. Operational productivity is a huge advantage. Today's tools can connect present and past automation systems to enterprise systems. Rockwell Automation's FactoryTalk ProductionCentre, MES Industry Suites, CPGSuite, PharmaSuite, and AutoSuite manufacturing execution system (MES) software packages are installed in hundreds of plants, and have thousands of users, Kulaszewicz said, while standard unmodified Ethernet allows easy connections of platforms to the enterprise. Capital expenditures that shift to operational expenditures provide new business models.

Industrial automation security, device, network, computer, application, and physical layers are all connected. Information security is the price of entry, today.

"We won't leave anyone behind, so you can secure your connected enterprise. Connecting the enterprise has been the message from Rockwell Automation for a long time," Kulaszewicz said, showing images of older and newer company technologies.

Partner network

The Connected Partner Network of Rockwell Automation includes Cisco, Microsoft, Panduit, and VMWare, as well as partner programs for other automation vendors and for system integrators.

This broad network, Kulaszewicz said, creates customer value, faster time to market, lower total costs of ownership, improved asset utilization, and enterprise risk management.

The MES applications are running in more than 20 Rockwell Automation plants, now updated with SAP providing an operational excellence system.

Rockwell Automation examples

Robert Murphy, vice president of operations, Rockwell Automation, at RSTechED 2014, outlined the very real challenges of migrating from homegrown systems to commercially available manufacturing execution systems (MES), such as FactoryTalk ProductionCentreBob Murphy, Rockwell Automation vice president of operations, said the company has 387,000 SKUs and 20 plants, which process average orders with 200 part numbers. In addition, average product life has been 20 years.

Murphy has helped with a total restructuring of the company's supply chain, globally, which he likened to trying to change a tire on a car that's going 60 mph. The five-year plan for the restructuring included dedicated resources of about 45 project engineers and development of a detailed playbook with one and only one way to do things. Steps included improving upon existing process and service levels.

Murphy started with what many automation customers encounter, disparate and multiple systems in each plant, including one with five enterprise resource planning (ERP) systems. Such fracturing provides zero global supply chain visibility, Murphy admitted, as custom applications interact with or run on the shop floor. The cost to replicate custom systems globally would have been prohibitive, he said.

Plants have many assets—people, processes, and technologies—and Murphy used high-caliber local engineers and experts from all areas to create global collaboration with manufacturing IT and corporate IT. "In addition, an MES layer dedicated team of four individuals has grown to (still) four individuals. It doesn't take an army to do this well," Murphy said.

Local help, centrally managed

Lots of local optimization of custom software shifted to a centralized strategy, with a configuration tied to metrics, using a centrally managed toolkit for supply chain optimization.

"It was challenging," Murphy said, "because there was a lot of local pride in custom applications. When you're the one with the custom application, it's OK if it's going well, but when goes wrong, it's a lonely day, week, or month." FactoryTalk ProductionCentre was critical to enabling the new workflows with localized execution at each plant, in layers from SAP, a Rockwell Software ERP Integration Gateway, FactoryTalk ProductionCentre for the MES layer, and FactoryTalk Live Data. FactoryTalk VantagePoint tied it together from top to bottom, evident on the graphic that Murphy showed.

At the Monterrey, Calif., electronic board assembly plant, about 1.5-2 million parts, 65 raw materials, and 10,000-15,000 boards per day are produced with 55,000 transactions per day.

At the PowerFlex flow assembly line in Mequon, Wis., an Atlas Copco torque system includes full traceability and error proofing, with an alarm and line lockout, preventing product from moving to assembly or shipping if it isn’t correct, said Robert MurphyAt the PowerFlex flow assembly line in Mequon, Wis., an Atlas Copco torque system (see photo) includes full traceability and error proofing, with an alarm and line lockout that prevents product from moving to assembly or shipping if it isn't correct, Murphy said.

Workflow achievements

Benefits related to the improvement include inventory reduction from 120 days to 82 days, 30% less per year in capital expenditures, supply chain delivery improvement from mid-80 percentages to 96%, and reduced lead times by 50%. Quality improved with a 50% reduction in parts per million (PPM) defects, and productivity increased 4%-5% per year, Murphy said.

Next is a push for continuous improvement to optimize, implement, and design, with future technology and greater customer dynamics. Murphy said he wants to know where a drive is in the workflow and how long it will be until shipping. The new tools provide new ways to leverage people, processes, and technologies.

- Edited by Mark T. Hoske, content manager, CFE Media, Control Engineeringmhoske(at)cfemedia.com

ONLINE extra

See more from Rockwell Automation about RSTechED USA.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.