ROS Industrial aims to open, unify advanced robotic programming

Video: Multiple robots can be operated within one open-source programming environment, explains Shaun M. Edwards, senior research engineer, robotics and automation engineering section, Southwest Research Institute.

01/28/2013

Flash is required!

Shaun M. Edwards is senior research engineer, robotics and automation engineering section, Southwest Research Institute. Courtesy: CFE Media videoVideo: ROS Industrial, an open-source industrial robotics package, was used to program and illustrate the robots used in this demo at Automate 2013, as explained by Shaun M. Edwards, senior research engineer, robotics and automation engineering section, Southwest Research Institute (SwRI), an independent, nonprofit applied research and development organization. ROS stands for robot operating system. In the short video, Edwards said the software enables advanced industrial automation applications.

Increasingly, robots are being considered for use in dynamic environments where perception capabilities are involved and the environment is constantly changing. The robot must act intelligently to avoid collisions and other things that might damage robots or people, or things in its environment. These capabilities aren’t met by off-the-shelf products, said Edwards, which is the reason for forming ROS Industrial Consortium (RIC).

In the demonstration, Edwards explained, two small robots, Motoman SIA20D and Universal Robots UR5, use 3D perception to identify objects on the table in front of them, figure out how to pick them up, and then place them where they need to be. The UR5 is working on a clutter pile, typically very difficult for robots to sort and pick up. The SIA20D recognizes the parts selected from the UR5, selects the part, and puts it where it needs to be. Many industrial applications can use this functionality, for bin picking or other dynamic applications.

ROSIndustrial software allows the user to create something very complex, see all associated data, robot location, computer-aided design (CAD) data, representations of the robot cell, and 3D information in one environment, with debugging, to ensure the pro

The “cool” on-screen depiction shows what the robot sees and what each is thinking. From a development standpoint, it allows the user to create something very complex, see all associated data, robot location, computer-aided design (CAD) data, representations of the robot cell, and 3D information all in one environment, with debugging, to ensure the programs are robust.

Motoman SIA20D and Universal Robots UR5 use 3D perception to identify objects on the table, figure out how to pick them up, and place them where they need to be. Courtesy: CFE Media video

RIC is seeking industry’s help to learn more about advanced robotic needs, then wants to work to help meet those needs. The open-source ecosystem envisions involving end users, system integrators, open-source developers, educators and nonprofit organizations, government, R&D collaborators, and robot suppliers. As the consortium’s site says, “envision a world where industrial robots use a common software language, where reduced integration costs fuel growth in advanced manufacturing, where industrial automation enjoys the same exponential rate of progress as computers and mobile devices.”

www.ROSIndustrial.org 

- Mark T. Hoske, content manager, CFE Media, Control Engineering and Plant Engineeringmhoske(at)cfemedia.com.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.