Rotating torque sensor series

The Dyno LaborSaver rotating torque sensor series from SensorData Technologies allows for dual measurement and has a wide range of measurement options.

07/08/2013


The Dyno LaborSaver rotating torque sensor series from SensorData Technologies allows for dual measurement and has a wide range of measurement options. Courtesy: SensorData TechnologiesSensorData Technologies' Dyno LaborSaver is a dual range rotating torque sensor series that features a 5:1 ratio capacity of zero to ± full-scale, with a wide range of measurement options.

The dual measurement range of the Dyno LaborSaver makes it ideal for use within dynamometer test stand applications, particularly ones in which sensor access may be limited by space or installation environment constraints. In addition, the product is suitable for low-range torque measurement requirements, in applications where high torsional spikes may occur. This significantly reduces downtime on the test bench, as well as overall test costs, by eliminating purchasing requirements for multiple torque sensing units.

Available in six base models and with a variety of customization options, the Dyno LaborSaver series is offered in standard ranges from 100 to 500,000 lb-inches. The low-range bridge is available in capacities from 0 to ±1/5 full-scale of the higher range. Units feature high-accuracy on both distinct bridges. Voltage outputs may be either simultaneous for both bridges; or selectable to suit customer requirements. The high torsional stiffness of this product range, as well as its reduced rotating inertia, allows for increased frequency response. Its relatively compact size allows for ease of installation and space reduction, as units occupy an overall footprint that is far less than torque sensors of equivalent ranges.

SensorData Technologies

www.sensordata.com 

- See more Control Engineering sensor products.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.