Rotor insertion flowmeter for measuring mass and volumetric flow

Spirax Sarco's RIM20 Rotor Insertion Flowmeter is designed to utilize smart multivariable electronics for measurement of mass or volumetric flow, density, temperature and pressure in one instrument.

By Spirax Sarco July 11, 2016

Spirax Sarco’s RIM20 Rotor Insertion Flowmeter is designed to utilize smart multivariable electronics for measurement of mass or volumetric flow, density, temperature and pressure in one instrument. It is designed for applications such as measurement of steam and natural gas flows for fiscal or load control and heat flow calculations for chilled, hot water and a variety of other liquids and gases in line sizes from 3- to 80-in. The RIM20 low-mass rotor design is fabricated from a single solid block of stainless steel, with no welded joints. There are six field-installable cartridges with different turbine pitches. This field configuration versatility, plus a wide 25:1 turndown, enables the flowmeter to match flow rates precisely.

Spirax Sarco

Spirax Sarco | First for Steam Solutions 

– Edited by CFE Media. See more Control Engineering process sensor and actuator products.