Rugged data protection in silicon disk drive
San Jose, Calif. —Designed specifically for high operational shock and low power consumption, these 2.5-in. IDE silicon drives contain no moving parts and do not require constant power to retain information. Capable of surviving 1,000 Gs of shock (equivalent to dropping 8-ft. onto a hard surface), and providing 500,000 hr MTBF makes the silicon drive especially suited for industrial appl...
San Jose, Calif. —Designed specifically for high operational shock and low power consumption, these 2.5-in. IDE silicon drives contain no moving parts and do not require constant power to retain information. Capable of surviving 1,000 Gs of shock (equivalent to dropping 8-ft. onto a hard surface), and providing 500,000 hr MTBF makes the silicon drive especially suited for industrial applications. Designed to swap-out with existing hard drives, these drives are available in 4 to 160 MB sizes, and provide ATA bus transfer rates of 8.0 MB/sec (read/write) with a media transfer rate of 3.5 MB/sec for reading and 0.71 MB/sec for writing.
Contec Microelectronics USA Inc.
Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Click here to start this process.