Safety: Risk management

Risk assessment and risk management plans help with industrial safety and machine safety efforts, using standards, processes, hardware, software, and continual education.

05/09/2013


Safety: Risk Management, Control Engineering, May 2013, articleRisk assessment and risk management plans help with industrial safety and machine safety efforts, using standards, processes, hardware, software, and continual education. Control Engineering May 2013 North American print and digital edition included the following articles on safety. Each article is linked below, at full length, with additional information.

 

How to use ISO functional safety standards

Navigate and apply ISO functional safety standards using this roadmap for common-sense machine safety risk reduction.

 

Achieve a higher safety performance level with EN ISO 13849-1

If you do not consider yourself as one of the early adopters of ISO 13849-1, is there still time to change to comply to the machine safety standards current requirements, and what does it involve?

 

Safety first: Put up your guard

Case study: Machine safety culture change at global consumer products manufacturer results in closing of 69% of the major findings from global assessments; and closing of 95% of corrective actions and preventive actions from fatalities.

 

How to make a health, safety, and environmental plan

Making an HSE plan is more than a creating set of rules for manufacturing health, safety, and environmental activities. Here’s what you need to know about HSE.

 

- Articles edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, mhoske(at)cfemedia.com.

 

Also see the Control Engineering Machine Safety blog, with more safety advice about codes, standards, and best practices related to machine safety.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.