SCADA security directions

SCADA security will continue to face potential developements such as a merging of SCADA and ICS security standards and certifications and a potential security threat to networks in Europe and the United States.

02/20/2013


ISS SourceNote: This is an excerpt from a longer blog.

January is a month I dread. It’s not the cold, the rain and the gray skies here on the west coast of Canada (although that is bad enough). And it is not the post-Christmas avalanche of credit card bills (also bad). The nightmare for me is the annual “SCADA Security Predictions for the Next Year” article I write every January.

You see, every January I make between three and five predictions for the upcoming year. Then the following December people remind me that I made those predictions 12 months ago. They then get to tell me how poorly I did. In between January and December I get to worry.

Take my predictions for 2012. I thought I had done well, getting two out of three predictions right with one still undecided. Then Sean McBride informed me that I had counted wrong. I had said there were 569 new SCADA/ICS vulnerabilities in 2012. Unfortunately (for me), this is cumulative total since 2001. Only 248 new vulnerabilities were announced in 2012. Since I predicted there would be 500 new vulnerabilities in 2012, I was way off base and only scored 0.333 for my 2012 predictions. Not so good.

Part of the problem is the industrial automation world moves glacially slow compared to sectors like home computing or communications, making predictions of any signification change a challenge. As Dale Peterson of Digital Bond has pointed out, too little has changed in the past decade when it comes to SCADA security. He is right, but it is not just security that moves slowly in this industry. Things that take years in other sectors take decades for industrial systems.

Take industrial wireless – back at the turn of the century, it was promoted as the technology that would soon dominate the plant floor. Over ten years later, Frost & Sullivan Research Analyst Anna Mazurek writes, “The market needs another 4-5 years of pilot applications and technology trials to address all pending concerns…” Industrial wireless will come, but the time scale is much longer than a year or two.

Of course, I could take the easy way out and predict what will not happen in 2013. For example, the confusion over which NERC-CIP version companies should be complying with will not get sorted out in 2013. A cyber security bill will not get passed by the US senate in 2013. And most PLC and SCADA vendors will continue to ship insecure controllers using insecure protocols in 2013.

But that is cheating, so once again I stick my neck out and make a few real predictions of events and trends in the SCADA and ICS world.

Prediction 1 – Tablets

Back in December, I blogged about a survey that asked engineers to identify their unfulfilled industrial networking desires. The number one item turned out to be “Connecting to the factory with a smart phone”. This is the year that the mainstream control system vendors will start promoting iOS apps and iPhones/iPads will start to be used for industrial applications.

As with all industrial technologies, we won’t see a full invasion of iDevices on the plant floor in 2013, but the wall will be breached. Maintenance and support will be the first applications. When your maintenance team is trying to repair that failed transmitter or troubleshoot that drive at 2 a.m., it is very nice to be able to check the inventory system for spare parts or review the online manuals for troubleshooting advice. Being able to do that right where the problem is (rather than having to go back to the office) will be a powerful driver for allowing tablet devices on the plant floor.

This won’t be pretty from a security point of view, but we will have to get used to it. Maybe it will drive the industry to deploy holistic security strategies rather than the security band-aids so often seen now.

Prediction 2 – International Security Standards

One of the issues for companies wanting to start securing their ICS is the existence of so many competing SCADA and ICS security standards. Last year the security committees at ISA and IEC joined forces and the result was the ratification of IEC/ISA 62443-2-1 – Industrial automation and control systems security management system.

This year there will be more coalescing of different industry and national documents into coherent international standards. At the same time, the usability and consistency of the standards will improve – a number of new or substantially improved documents will release – for example, a completely rewritten 62443-02-01 may be available before December.

Prediction 3 – Independent SCADA/ICS Security Professional Certifications

Today anyone who can use SCADA and security in the same sentence can call themselves a SCADA security expert. This year will see the release of certifications for SCADA/ICS Security Professionals. The best will be independent of both ICS/security vendors and the various training companies and will just focus on testing subject matter expertise.

Prediction 4 – The Industrial Safety Makes Security a Priority

A few years ago, I predicted that companies would start to combine industrial safety and industrial security analysis. It happened, but much more slowly than I expected. So I am dragging my old prophesy out again, but with a twist. This year, consultancies like TUV will make a major push into the SCADA/process security markets (of course, safety companies like exida have been doing that for a few years now). At the same time, the IEC safety standards will start to be reevaluated in terms of security. Hopefully efforts like the LOGIIC analysis of Safety Instrumented Systems will start to make headlines too and not stay hidden under a bushel.

Prediction 5 – A Big Security Event Close to Home

Last year I predicted that there would not be another major security event like Stuxnet – was I ever wrong. Flame and Shamoon, plus others like Gauss, hammered the energy industry in the Middle East. So this year, I will go the other direction and say there will be at least one major event impacting industry and it will be in either Europe or North America.

I hope I am wrong about this one.

Eric Byres is vice president and chief technology officer at Tofino Security. Click here to read the full version of the Practical SCADA Security blog.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.