Scaling can sap energy, maintenance time

If some method can be found to control scaling, there is the potential to save energy and prevent equipment failure and reduce maintenance

04/22/2013


When weather is heated, limescale can occur. This problem can clog pipes, reduce energy efficiency, and cause equipment failure. Courtesy: Scalewather North America Inc.Boil a kettle of tap water in a hard water area and two undesirable observations are made: A fine but harmless scum appears on the surface of the water and a hard white encrustation develops on the heating element. The latter is calcium carbonate and is usually referred to as limescale. The limescale that deposits on the heating element will, if untreated, reduce the efficiency of the kettle, induce corrosion of the element, and ultimately lead to appliance failure. However, it is not just domestic appliances that are affected; boilers and steam generators also develop limescale deposits, which will cause similar problems if left untreated.

Limescale can form wherever water is heated. The reason for the problem is that source waters (potable or ground water) contain dissolved mineral salts, sometimes described as hardness, which have low solubility in the water. When heated, the water can no longer hold these salts in solution and deposition must then occur. 

What can go wrong?

Deposits are an insulting layer on heat transfer surfaces. This leads to more power being consumed or to the need to install heavier duty equipment to compensate. It is estimated that 40% more energy is needed to heat water in a system fouled with ¼-in. of limescale.

Scale in water lines reduces the available cross-section area and the throughput. Eventually the line will become completely blocked. Equipment then needs to be shut down for cleaning, and this costs money.

Safety valves or emergency process sensors (e.g., that operate deluge systems) may not operate in an emergency. Overheated boilers can be dangerous.

Stagnant conditions can develop in void spaces beneath deposits, and this encourages corrosion of steels and other metallic surfaces. The results can be fluid leaks and equipment failure, which is potentially dangerous. Scale surfaces are also excellent growth sites for bacteria, which can crate conditions hazardous to health (e.g., production of legionella pneumophila).

In order to establish if you have a problem, try answering these questions:

  • Do appliances such as water-fed equipment contain white scale?
  • Are there signs of unexpected deposit formation around valves or at the pipe outlets?
  • Are boilers/heat exchangers performing below design?
  • Is corrosion a problem in the plant?
  • Is the water throughput less than expected? 

The more times that the answer is "yes," then the more likely it is that you have scale. 


<< First < Previous 1 2 Next > Last >>

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.