Secure grid from turbine to toaster

While traditional IT security emphasizes confidentiality, integrity, and availability, control system security emphasizes safety, reliability, and integrity.

03/05/2012


ISSSource“The smart grid is an enormous environment and each house is an open port to that grid. Securing meters, distributing patches, communications, and the sheer physical expanse are all huge challenges,” said Patrick Miller.

Miller, chief executive at EnergySec and principal investigator for the National Electric Sector Cybersecurity Organization, Pike Research senior analyst Bob Lockhart, and Ernie Hayden, managing principal for energy security at Verizon discussed issues and presented the webinar “Securing the smart grid” last week.

They looked at challenges to securing smart grid supervisory control and data acquisition (SCADA) systems, how industry should approach the task, how securing SCADA is different from securing enterprise information technology (IT) networks, and what the security issues are for SCADA communications.

Standards don’t seem to be one of the problems. NISTIR 7628: “Guidelines for Smart Grid Cyber Security” is a solid foundation for going about the task agreed all three experts. However, the nomenclature in titling the documents could be better. “They shot themselves in the foot by using the word ‘guidelines’ instead of ‘standards,’” Hayden said.

“NISTIR is great guidance,” added Miller. “Implementing what we have is the problem. The C-levels (management) need to step up. Security is what’s important.”

Discussions during the webinar were far ranging and included: Securing Smart Grid SCADA Systems; security guidelines that best determine adequate security; how SCADA security is different from smart metering security; SCADA communications security issues; what the key Smart Grid Cyber Security risks and vulnerabilities that industry has not adequately mitigated are; identifies which technologies that can improve the cyber security of Smart Grids; and related important technology issues for Smart Grid cyber security?

Analyzing the differences in securing the grid versus securing an industrial facility, Pike Research, notes that industrial control systems process different data than enterprise networks, for different reasons, and most of the endpoint actors are machines, not people.

While traditional IT security emphasizes confidentiality, integrity, and availability, control system security emphasizes safety, reliability, and integrity. Thus, the objectives are different, the approaches can be different, and oftentimes even the products are different.

However, some things stay the same. No matter how much we add automation to a power grid, the underlying objectives still exist. Integrating IT into a power grid presents enormous potential to deliver commodities more efficiently and profitably. Newer techniques can significantly reduce wasted energy, with social and environmental benefits.

Sheble is an engineering writer and technical editor in Raleigh, NC.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.