September 3 Southland Industries update: Rough testing began, major equipment placed, condenser water system flushed

Rough testing has begun in hospital basement, Level 1; all major equipment has been set in place; the condenser water system is being flushed and passivated in the CUP.

09/03/2013


As of Sept. 3, 2013:

  • Rough testing has begun in the hospital basement, Level 1, and all floors of the North Clinic
  • All major equipment has been set in place throughout the project, air handling units are being connected to the hydronic systems in preparation for temporary air conditioning
  • The condenser water system is being flushed and passivated in the CUP, Chilled water loops are being tested throughout the project in preparation for flushing.

Additional update

  • Southland Industries recently celebrated the safety milestone of going 500+ days without injuries at Ft. Hood.

Figure 1: Bio Safety Lab exhaust stacks (BSL2 + 3). Courtesy: Gary Lovewell, Southland IndustriesFigure 2: Condenser water system being flushed through bypass into the cast in place concrete basin. Courtesy: Gary Lovewell, Southland Industries

Figure 3: Hospital Supply Air Riser in the Level 3 Mechanical Room. Courtesy: Drew Thomas, Southland IndustriesFigure 4: Nicolas Sfeir, Southland Industries Southwest Division Leader, congratulating the Ft. Hood project team during a celebration barbecue. Courtesy: Southland IndustriesFigure 5: The project team celebrating the safety milestone, “500 Injury Free Days for Ft. Hood, Texas.” Courtesy: Southland Industries



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.