Serial fiber optic modules for most communication interfaces, bus systems

Phoenix Contact PSI-MOS...1300 series of fiber optic modules, gives the company fiber optic media converters for nearly all serial communication interfaces and bus systems.

08/21/2009


Phoenix Contact PSI-MOS...1300 series of fiber optic modules

 

Middletown, PA - With the introduction of the PSI-MOS...1300 series of fiber optic modules, Phoenix Contact now offers fiber optic media converters for nearly all serial communication interfaces and bus systems, the company says. The PSI-MOS media converters are a natural fit for critical applications that require high availability.

The new single mode fiber optic modules for the 1,300 nm wavelength complement the existing modules for the 660 nm and 850 nm wavelengths. Using these common wavelengths also allows the use of polymer or plastic, hardened clad silica (HCS), multimode glass, and single-mode glass fiber cable.

The media converters have local LED diagnostics for fiber optic cable connection and proactive alarming enhance reliability. Single fiber optic modules with dual fiber cable connections provide redundant point-to-point, star, tree and ring topologies, depending on the communication system.

The module's T-bus connection system allows the sharing of data and supply voltage. Fiber optic cable distances can range from a few feet to more than 20 miles in length.

Phoenix Contact says it offers an extensive line of fiber optic accessories to terminate fiber optic cable in the field. Specially designed portable kits and different connector types, such as FSMA, B-FOC and SCRJ, are available.

Learn more about Phoenix Contact signal converters .

See a Phoenix Contact YouTube video about fiber optic media converters .

- Edited by Mark T. Hoske, editor in chief, Control Engineering

Read more about Control Engineering system integration





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.