Series of radio heads for transceiver system

National Instruments' (NI) series of 28 GHz radio heads for the mmWave Transceiver System creates a commercially available full transceiver that covers a spectrum from 27.5 GHz to 29.5 GHz.

By National Instruments May 23, 2017

National Instruments’ (NI) (Nasdaq: NATI) series of 28 GHz radio heads for the mmWave Transceiver System creates a commercially available full transceiver that is designed to transmit and/or receive wide-bandwidth signals of up to 2 GHz of bandwidth in real time, covering spectrum from 27.5 GHz to 29.5 GHz. The mmWave transceiver system software defined radio (SDR) and application-specific software offer a complete and comprehensive starting point for 5G measurement and research addressing both the 3GPP and Verizon 5G specifications.

The mmWave Transceiver System can operate as either an access point or user device in any over-the-air testing scenario. Users can also develop mmWave communication prototyping systems or perform channel measurements—necessary exercises for wireless researchers to understand the characteristics of a new spectrum—using the same system. The software works with the previously released radio heads for 71-76 GHz, so users can easily adapt their mmWave Transceiver System to 28 GHz by changing the RF radio heads.

Additionally, the mmWave Transceiver System baseband software delivers a complete communications physical layer compatible with the proposed 3GPP and Verizon 5G specifications as source code for LabVIEW system design software. This helps expedite system development by delivering a ready-to-run system that users can modify to adapt to their specific areas of research or testing.

National Instruments (NI)

Engineer Ambitiously – NI 

– Edited by CFE Media. See more Control Engineering wireless products.

ONLINE extra

See additional stories from NIWeek linked below.