Servo driver for motion control

EZSV10 dc brush servo driver measures 0.95 x 1.4 x 0.6 in. (24 x 35 x 15.25 mm), smaller than a standard quadrature encoder.

By Control Engineering Staff June 13, 2005

EZSV10 dc brush servo driver measures 0.95 x 1.4 x 0.6 in. (24 x 35 x 15.25 mm), smaller than a standard quadrature encoder. Fully programmable controller requires little or no tuning when used with most motors measuring less than 1.5-in. in dia. A single 4-wire bus (2 power, 2 communications) can daisy chain up to 16 dc motors simultaneously. Device accepts high-level commands from a serial port to control motors at 1.5 A continuous, from 12-40 V dc. Positioning system is designed to meet demanding automation requirements in a wide range of applications.

www.allmotion.com

AllMotion Inc.