Servodrive control: Laser cutter provides precise power

Video: Mitsubishi 2512HV-20CF laser cutter at Atlas Tool & Die Works Inc. has repeatability accuracy of +/- 0.000197 in. and uses three servos by Mitsubishi Electric Corp. The controls can operate up to 6 axes, if needed. Latest machine offers more capabilities. Also see photos, cutting speed table.

02/06/2013

Flash is required!

Video: Mitsubishi 2512HV-20CF laser cutter at Atlas Tool & Die Works Inc. has repeatability accuracy of +/- 0.000197 in. and uses three servos by Mitsubishi Electric Corp. The controls can operate up to 6 axes, if needed. Operator at the controls is Brian Squeo from Atlas. Cover video by Peter Welander, content manager, Control Engineering, CFE Media.



Operator at the Mitsubishi laser cutter controls is Brian Squeo from Atlas Tool & Die Works Inc., a family-owned business based in Lyons, Ill., (near Chicago). The company provides stamped, cut, and fabricated metal parts and assemblies since 1918. ImagePrecise power: This Mitsubishi 2512HV-20CF laser cutter at Atlas Tool & Die Works Inc. has repeatability accuracy of +/- .000197 in. and uses three servos by Mitsubishi Electric Corp. The material in the video and photo is 14-gauge, type 304 stainless steel, being cut at a feed rate of 70 in. per minute (IPM) using 650 W of power. Operator at the controls (video and photo) is Brian Squeo from Atlas.

Machine varies by material and thickness. The speed table provided shows different speeds this machine is capable of achieving; the fastest is 400 IPM by cutting .040 (19-gauge) mild steel with oxygen. The machine controls used can run up to 6 servo drives, according to Tim Gelsomino, sales liaison, MC Machinery Systems Inc., Mitsubishi EDM/Laser.

February 2013 Control Engineering cover video and related cutting photos are by Peter Welander, content manager, Control Engineering, CFE Media. This is the first digital edition cover video from Control Engineering.

Online extra

Below is more information provided by MC Machinery Systems Inc., Mitsubishi EDM/Laser, about the Mitsubishi 2512HV-20CF laser cutter and the latest machine in this line, the Mitsubishi HVII.

Mitsubishi 2512HV-20CF laser cutter

Mitsubishi 2512HV-20CF laser cutter has easy-to-use, state-of-the-art technologies. Courtesy: MC Machinery Systems Inc., Mitsubishi EDM/LaserThe HV was touted as a workhorse with easy-to-use, state-of-the-art technologies. It meets the demands and needs of users, and brings unsurpassed performance at the lowest cost of ownership of any machine in its class, the company said, offering the following:

  • Advances in processing technology optimize gas flow and beam quality while allowing for exceptional plate processing performance.
  • Mitsubishi Super HP control redefines a hybrid’s ability to produce accurate parts in thin, high-speed cutting applications.
  • DR control combines real-time power ramping with acceleration or deceleration—dramatically reducing dross adhesion and thermal influences.
  • Superior edge quality
  • Reduced setup times
  • Processing versatility for thin or thick workpiece applications
  • Reduced de-burring of sheet metal applications
  • Intelligent Assist Gas Monitoring, resulting in less scrapped parts
  • Automatic Quick-Assist Gas Change function
  • Optimal nozzle design reduces running costs
  • Long-life part-design for drive system and other components
  • Revolutionary “Dual” Cross-Flow resonator (40 CF-R)
  • Integrated Maintenance Guide for most maintenance functions 

Mitsubishi 2512HV-20CF laser cutter at Atlas Tool & Die Works Inc. has repeatability accuracy of +/- 0.000197 in. and uses three servos by Mitsubishi Electric Corp. The controls can operate up to 6 axes, if needed. Image by Peter Welander, content managerControl specifications include retry control, multiple setup screen, telephone line interface, and hard disc memory capacity of 2 GB. It has functions for processing start point return, feed hold point return, corner control, and slope control. It also has an error help screen, processing setup screen, maintenance screen, scaling mirror image, figure rotation, and graphics automatic scaling. Other control capabilities include laser macro, automatic power off, processing condition register, processing condition search, processing condition adjustment, one-touch 2nd/3rd zero point return, and character string replacement. The display screen is a 10.4-in. thin-film transistor (TFT) touchscreen, with 2 MB memory, a 3.5-in. floppy disc, and optional network-use LAN card.

Mitsubishi HVII laser cutter

HVII has advanced processing technology to optimize gas flow and beam quality with exceptional plate processing performance, along with a more advanced human-machine interface and controls than the prior generation. Courtesy: MC Machinery Systems Inc., MiHVII has advanced processing technology to optimize gas flow and beam quality with exceptional plate processing performance. Mitsubishi Super HP control is said to redefine a hybrid’s ability to produce accurate parts in thin, high-speed cutting applications. Dynamic response (DR) control combines real-time power ramping with acceleration or deceleration, dramatically reducing dross adhesion and thermal influences. A “Mels Eye” option offers plasma detection, pierce detection, auto-focus, and burn detection.

The new LC30BV Mitsubishi control simplifies cutting setup and preparation. It has a complete database of processing conditions applicable to a wide variety of cutting. High-speed z-axis height sensing and latest pierce technology drastically reduce cutting time. It has a 15-in. touchscreen control, a 1.2 GHz 20 GB hard drive, USB port, Ethernet, and new interface with high-speed graphics and help screens. HVII provides simultaneous 3-axis control, and z-axis height control also is possible. Encoder provides position detection.

Cutting speed table: Mitsubishi HV laser cutter cutting speed varies by material, thickness, and other factors. Table charts the speeds this machine is capable of achieving; the fastest is 400 IPM (inches per minute) by cutting 0.040 (19-gauge) mild steel

Background, history

MC Machinery markets and services machine tools, specifically electrical discharge machines (EDM), industrial laser and press brake machines, and waterjet cutting machines. Established in 1991, it is owned by MIC and parent Mitsubishi Corp. History.

Atlas Tool & Die Works is a family-owned business based in Lyons, Ill., (near Chicago) providing value-added stamped, cut, and fabricated metal parts and assemblies since 1918. The company also perform precision cutting of marble, granite, stone and plastic, and provides die and fixture building and maintenance services.

- Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering, Plant Engineering, mhoske(at)cfemedia.com.

www.mcmachinery.com 

www.atlas-tool.com/laser_cutting.htm 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.