Should you be an early adopter of Microsoft Server 2012 for today’s control systems?

You might get ahead of your control system software suppliers, but you can probably install the most up-to-date operating systems now and get the maximum lifespan.

05/20/2013


A call came in the other day from a customer asking about replacing some legacy operator workstations and a primary domain controller server. He wanted to know if it would be possible to use Microsoft Windows 8 Professional or Server 2012 as the operating systems with the new workstations and primary domain controller, so he can get the most out of the longevity of the new software.

After further research, I could find no reason not to leverage Server 2012 on the new primary domain controller. I checked with the primary control vendor supporting this particular customer, and they saw no reason not to use Server 2012 on the primary domain controller. I went a step further and checked with colleagues on their experiences with the differences between Server 2008 R2 and Server 2012. Since there were no issues identified, I recommended the customer move forward with purchasing and installing this new platform as the primary domain controller for their plant control system. The customer ordered the new server hardware and their IT department purchased their first volume license of Server 2012 standard.

The experience of installing Server 2012 was very similar, if not the same as installing Windows 8 Professional. At the end of the installation, I was surprised to see the start button had disappeared as it had with Windows 8 Professional. With Server 2012, all of the applications are the desktop type, all neatly organized on the start screen based on which roles you assigned to the server (see graphic). On previous versions of Microsoft Server these were inadvertently buried in other submenus and took some digging to find.

With Server 2012, all of the applications are the desktop type, all neatly organized on the start screen based on which roles you assigned to the server.

This seems to be much more intuitive to use then the start screen that Windows 8 Professional has. I would also like to note that promoting the server to a domain controller was much more automated than previous Server versions, and it added the supporting roles necessary for the domain controller to function properly. Any additional help that I needed was easily found at Microsoft’s support site, or by simply doing an internet search. The other new feature that I found was the new Server Manager’s Dashboard. This makes it very easy to monitor any status and / or issues with any of the roles the server, or servers within a group are providing (see graphic).

The other new feature that I found was the new Server Manager’s Dashboard. This makes it very easy to monitor any status and / or issues with any of the roles the server, or servers within a group are providing.

During the deployment, the new domain controller computers throughout the plant were joined to the domain with no problems. The plant control system computers contained the following operating systems: Windows XP Professional, Windows 7 Professional, and Server 2008 R2.

This experience should highlight the fact that even though many of our prominent control vendors do not support the latest operating systems that Microsoft releases, this does not mean that supporting systems cannot use the latest Windows operating system available in supporting roles. This not only provides added value for the customer, but also allows us to become proficient on the latest software available. You too can be classified as an early adopter, even if you are working with legacy control software.

This post was written by John Boyd. John is a technology leader at MAVERICK Technologies, a leading system integrator providing industrial automation, operational support, and control systems engineering services in the manufacturing and process industries. MAVERICK delivers expertise and consulting in a wide variety of areas including industrial automation controls, distributed control systems, manufacturing execution systems, operational strategy, and business process optimization. The company provides a full range of automation and controls services – ranging from PID controller tuning and HMI programming to serving as a main automation contractor. Additionally MAVERICK offers industrial and technical staffing services, placing on-site automation, instrumentation and controls engineers.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.