Smart Grid standards for interoperability, interconnection, integration

Joining disparate power, IT, and communications systems in developing the Smart Grid.


Dick DeBlasio, Chair, IEEE Standards Coordinating Committee 21Standards are an important consideration in the work of building engineers, but their role is increasing with the globally intensifying implementation of the Smart Grid and the revolutionary changes that are being brought about to way that buildings interact with electricity.

There is an array of standards that helps enable interoperability, interconnection and integration of disparate systems as power, IT, and communications are interweaved in the developing Smart Grid. Fortunately, for the sanity of building engineers, there is order to the ways that the various standards produced by different bodies interplay.

For example, say a roof-mounted solar panel is being installed and connected to the grid through an inverter, there are a host of standards that power engineers can look to for guidance, such as Article 690 of NFPA 70: National Electrical Code (NEC) for minimizing electrical hazards in installation and operation, UL 1741 for additional fire and safety considerations with regard to distributed generators, IEEE 1547 “Standard for Interconnecting Distributed Resources with Electric Power Systems” for the basis of the interconnection of the photovoltaic device itself to the power grid, and IEEE 1547.1 “Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems” for commissioning tests.

Systems-level standards are an area of focus for IEEE with regard to the Smart Grid. The IEEE 1547 family of standards, for example, since the base standard’s original publication in 2003, has been steadily updated to reflect evolution in the UL 1741. Work is stirring, in fact, on a new full revision of IEEE 1547, to be completed by 2018. In considering the scope and intentions of a full revision of IEEE 1574, a wide variety of stakeholders are looking at the emerging technologies and applications—microgrids, islanding, inverter communications, ride-through frequencies/voltages, higher renewable penetrations, and synchrophasors, among them—that should be addressed.

IEEE 2030 “Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), End-Use Applications, and Loads” takes a similar system-of-systems approach.

More than 400 professionals from across the global communications, IT, and power industries collaborated in developing IEEE 2030, and, when it was released in 2011, it established the world’s first interface-by-interface guide to interoperability across the Smart Grid.  IEEE 2030 is a technology-agnostic roadmap to the standards and functional interfaces for securely integrating EPS with communications and IT and facilitating data exchange across the Smart Grid.

The Smart Grid is bringing definitive change to the ways that buildings relate with electricity. Whereas most buildings have historically been only consumers of electricity, more and more buildings will also serve as points of power generation in the Smart Grid. And whereas there has been no way and little need to determine when and how much buildings will need at various times of the day/week/month, more precisely understanding and forecasting power demand from and within a building is a frontier of innovation in the Smart Grid.

Standards development driven by the emerging, real-world needs of building engineers will help ensure this transformation is achieved as simply, cost-effectively and efficiently as possible.

In addition to his role as chair of IEEE SCC21 Standards Coordinating Committee on Fuel Cells, Photovoltaics, Dispersed Generation, and Energy Storage, which sponsors and leads the family of standards for IEEE 1547 and IEEE 2030, Dick DeBlasio is a member of the IEEE Standards Board and past member of the IEEE Standards Association Board of Governors and chief engineer with the National Renewable Energy Laboratory.

Paul , United States, 03/27/14 10:02 AM:

The IEEE 1547 spec has opened the door to innovative (and somewhat disruptive) solutions for grid tied Distributed Energy Resources. The next version will certainly accelerate this with critical standards that will allow/encourage more "plug and play" behind-the-meter assets such as DG and Energy Storage. Business models are emerging that offer these assets as exceptionally precise control elements to the P2030-conforming smart grid for maintaining resilience, reliability and balance as we move toward the rapidly emerging world of true Transactive Energy. Thanks for the vision in laying the foundation for this framework!
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Choosing controllers: PLCs, PACs, IPCs, DCS? What's best for your application?; Wireless trends; Design, integration; Manufacturing Day; Product Exclusive
Variable speed drives: Smooth, efficient, electrically quite motion control; Process control upgrades; Mobile intelligence; Product finalists: Vote now; Product Exclusives
Machine design tips: Pneumatic or electric; Software upgrades; Ethernet advantages; Additive manufacturing; Engineering Leaders; Product exclusives: PLC, HMI, IO
This article collection contains the 5 most referenced articles on improving the use of PID.
Learn how Industry 4.0 adds supply chain efficiency, optimizes pricing, improves quality, and more.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security