Solar industry capital expenditures set to rebound as emerging economies boost production

IHS reports that the solar industry will rise by 30% to $3 billion in 2014 because of increased sales in emerging economies in South America, Africa, and the Middle East.

09/10/2013


The sun is finally rising on the global solar business, with growing demand in developing regions helping to ignite the first increase in industrywide capital spending in three years in 2014, according to the PV Manufacturing & Capital Spending Tool from information and analytics provider IHS.

Global capital spending by producers of photovoltaic (PV) modules, cells, ingots, wafers and polysilicon is expected to rise by 30% in 2014 to reach $3.0 billion. This will mark the first time that expenditures have increased since 2011, when they grew 8%, as presented in Figure 1.

The projected growth will bring to an end a two-year period when spending dropped—by a stunning 72% in 2012, and by an anticipated 36% this year in 2013. During this period, PV industry capital spending will plunge by a gut-wrenching total of $10.6 billion, falling to $2.3 billion in 2013, down from $12.9 billion in 2011.

Solar industry players engage in capital spending in order to purchase manufacturing equipment and facilities used to produce PV raw materials or products. Spending has fallen in recent years because of massive overcapacity and oversupply, which has sent prices down throughout the supply chain.

However, a sustained increase in capacity from emerging economies is set to spur the 2014 recovery.

“South America, Africa and the Middle East now are leading the world in solar capacity additions—and they also are leading the capital expenditure segment of the PV business out of its slump,” said Jon Campos, solar analyst at IHS. “The overcapacity in PV production mainly has been concentrated in the developed solar regions of the United States, European Union and China. But as demand expands in new areas, PV manufacturers are gaining interest in producing their wares in these regions, resulting in new factory openings and boosting local capital spending.”

Dawn arrives for solar spending in emerging economies

After going up 23% in 2013, solar capital spending in emerging economies is expected to rise in the low 40% range for every year through 2017. In contrast, following zero growth in 2013, the established markets are expected to shrink by 5% to 10% during every year through 2017, as presented in Figure 2.

Among all the emerging economies, the largest percentage increase in capacity is occurring in South America, Africa and the Middle East.

Emerging markets account for 7.9 GW of the world’s total announced capacity for PV materials and products from ingots through modules, with the potential to climb to nearly 11 GW by 2017. Capital investments for the foreseeable future will largely remain in the areas of crystalline wafer production, cell and module equipment. 

Ending capital punishment   

The expected increase in capital spending comes as a welcome and long-anticipated change from the dismal conditions that have plagued the market in recent years. The solar shakeout has peaked and an inevitable return to reinvestment in equipment and technology is due in the near term.

“Our research is showing a return to market equilibrium with regard to supply and demand,” Campos said. “Overcapacity seems to be correcting itself, and from the last few financial announcements, a handful of solar companies have returned to profitability and widened margins. The last piece of the recovery puzzle is capital spending and investment in high-efficiency technology.” 

Spending spree

Beyond the rise in demand from emerging countries, other factors are contributing to the recovery in capital spending.

PV suppliers are engaging in new technology upgrades in order to enable higher efficiency and lower dollar-per-watt production costs. Equipment is also critical in allowing PV manufacturers to differentiate their products. Such differentiation can improve profitability and margins.

Current and potential trade conflicts concerning Chinese PV products could drive production to other locations, such as South America, Southeast Asia, Africa and the United States. In particular, U.S. states like Mississippi and Michigan are attractive regions for PV production because they provide cheap electricity and affordable land to manufacturers.



Cleverick , Non-US/Not Applicable, Jamaica, 10/11/13 11:11 AM:

Very informative
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.