Solar industry grows, but future may not be so sunny

04/01/2009


 

According to a New York Times article , solar energy capacity in the United States grew by 17% in 2008, according to preliminary report released by the Solar Energy Industries Assn . (SEIA). The recession has dried up the financing for many projects, but 2008 showed growth for a third consecutive year.

The report notes that 1,265 MW of solar power of all types were installed in 2008, bringing total U.S. solar power capacity up 17% to 8,775 MW. The 2008 figure included 342 MW of solar photovoltaics, 139 MWTh (thermal equivalent) of solar water heating, 762 MWTh of pool heating, and an estimated 21 MW of solar space heating and cooling.

Rates of growth beat 2007 as well, with the grid-tied PV segment leading with a growth rate of 81% for the amount of installed power in 2008 (292 MW) over the amount installed in 2007 (161 MW). Solar water heating installation grew at a 50% rate in 2008 (139 MWTh) over 2007 (93 MWTh), and pool heating growth slowed by 3% in 2008 (762 MWTh) from 2007 (785 MWTh).

States that led in grid-tied PV installation were California (178.6 MW), New Jersey, (22.5 MW), Colorado, (21.6 MW), Nevada, (13.9), and Hawaii (11.3 MW). For solar water heating systems, Hawaii led states, installing 37% of the total U.S. systems in 2008, followed by Florida (20%), California (7%), Colorado (5%), and Arizona (5%). The Mid-Atlantic States installed 7% of solar water heating systems.

Several states added or expanded incentives or requirements for solar energy, including California, Hawaii, Maryland, Massachusetts, Missouri, and Ohio.

To date, 28 states have renewable portfolio standards that require a certain amount of energy be generated from renewable sources, with 19 of these states mandating that a portion come from solar or distributed sources. A total of 42 states and the District of Columbia now have net metering rules allowing owners of solar energy systems to sell excess electricity back to the grid.

The solar power industry received an enormous boost from provisions in last year’s bailout bill and this year’s Stimulus Package. The SEIA reported that the Stimulus Package contains 19 different provisions for aiding solar power. However, according to the SEIA, solar developers and manufacturers need more policies designed to help an industry struggling against a recessed economy. National policies like a national renewable electricity standard would require the country to get a certain percentage of its electricity from renewable power. The solar industry continues to lobby for a “solar carve-out” in the policy, which would mandate that a percentage of those renewables come from solar power.





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.