Specifying energy efficiency systems for new, existing office buildings

Office buildings might seem like simple structures from the outside, but engineers engaged in such projects know they can be highly complex, and building owners are requesting more sustainable buildings.

10/30/2013


J. Patrick Banse, PE, LEED AP, Senior mechanical engineer, Smith Seckman Reid, Houston. Courtesy: Smith Seckman ReidRobert Ioanna, PE, LEED AP, Vice president, Syska Hennessy Group, New York City. Courtesy: Syska Hennessy GroupDouglas Lacy, PE, LEED AP BD+C, Senior associate, ccrd partners, Dallas. Courtesy: ccrd partners

Respondents:

J. Patrick Banse, PE, LEED AP, Senior mechanical engineer, Smith Seckman Reid, Houston

Robert Ioanna, PE, LEED AP, Vice president, Syska Hennessy Group, New York City

Douglas Lacy, PE, LEED AP BD+C, Senior associate, ccrd partners, Dallas


CSE: What software or systems do you use to model the energy consumption of the building?

Medical offices, in addition to sharing some of the same needs as conventional office buildings, have specialized needs, such as laboratory areas. Photo: Smith Seckman Reid Inc.Lacy: While we use a variety of modeling software packages, we use Carrier’s Hourly Analysis Program (HAP) for most projects.

Ioanna: We use eQUEST and Trane Trace as well as proprietary active Microsoft Excel-based spreadsheets. 

CSE: Describe window treatments (glazing, louvers, etc.) you have recently designed.

Lacy: We employ the daylight analysis features in AGI32 to assist our architectural clients in designing or validating the design of various horizontal and vertical louver systems. Once optimized for daylighting we compare to the effect of various glass selections. In some instances we have seen that improved glazing can result in more savings than that offered by louvers, especially when you have a less-than-desirable building orientation due to site conditions.

CSE: When designing the building envelope, what unique techniques or tools have you used?

Ioanna: We are being brought onboard projects much earlier than in previous times in the design of office buildings. Early on, when the basis of design decisions is being made for the architectural systems, we have used COMFEN to analyze alternative fenestration systems. COMFEN contains a sophisticated analysis engine that dynamically simulates the effects of key fenestration variables on energy consumption, peak energy demand, and thermal and visual comfort. The results from the simulations are presented in graphical and tabular format for comparative fenestration design cases to help users move toward optimal fenestration design choices for their project. This has proven to be a cost-friendly alternative approach for building owners to make quick and informed decisions at a somewhat reduced cost. 

CSE: How have you worked with the architect, owner, or other players to ensure the building envelope goals are achieved while maintaining aesthetic appeal?

Banse: Working with architects involves discussing glass types, location, required wall and roof insulation, and exterior and interior shading types and benefits at a minimum to achieve energy goals and meet minimum code requirements. 

CSE: Describe a recent project in which daylighting played a role in the lighting design of the office building.

Banse: Our own office space uses daylighting for exterior open space and interior offices that adjust and dim lighting to meet design light levels and be a part of achieving LEED Platinum status.

Ioanna: We have found that proper daylighting systems reduce lighting and cooling energy significantly, but the true benefit of daylighting is the positive impact on the occupants. Our current New York headquarters space implemented a daylighting control system. While the energy consumption was reduced based on the design, the overarching success of it comes from employee satisfaction. 

CSE: What types of renewable energy systems have you designed for office buildings?

Lacy: While many of our institutional and build-to-suit clients have shown interest in renewable energy system, in a standard office development model the resale time horizon for the building is often shorter than the ROI on the renewable systems and thus renewable energy systems are typically not pursued. 

Ioanna: We have designed photovoltaic systems, geothermal heat pump systems, microturbines at steam pressure reducing stations, solar hot water heating systems, and fuel cell systems.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.