Standards: NEMA reaffirms several for industrial control systems

Rosslyn, VA—The National Electrical Manufacturers Association (NEMA) reaffirmed, on Oct. 15, certain industrial control and system standards for certain controllers, control systems, test procedures, and motor control centers.

10/23/2007


Rosslyn, VA —The

National Electrical Manufacturers Association (NEMA)

reaffirmed, on Oct. 15, the following industrial control and system standards for certain controllers, control systems, test procedures, and motor control centers:

The NEMA reaffirmed standards are: ICS 2, Part 9-2002 (R2007) AC Vacuum-Break Magnetic Controllers Rated 1500 Volts AC; ICS 5, Annex F-2002 (2007) Industrial Control and Systems: High-Pressure Power Wash Test Procedure for Self-Contained Control-Circuit Devices; ICS 18-2001 (R2007) Industrial Control and Systems: Motor Control Centers; and ICS 18-2001 (R2007) Industrial Control and Systems: Motor Control Centers.

ICS 2, Part 9-2002 (R2007) applies to magnetically operated, full-voltage, vacuum-break, non-combination controllers rated 1,500 V for both motor and non-motor loads. It may be downloaded at no charge, and a hard copy or electronic copy purchased for $68.

ICS 5, Annex F-2002 (2007)

relates specifically to high-pressure power wash procedure requirements for proximity switches, limit switches, and panel-mounted control devices that include pushbuttons, pilot lights, and selector switches. It may be downloaded at no charge, and a hard copy or electronic copy purchased for $48.

ICS 18-2001 (R2007)

applies to three-phase 50- and 60-hertz motor control centers rated not more than 600 Volts ac. It may be downloaded at no charge, and a hard copy or electronic copy purchased for $64.

ICS 19-2002 (R2007) provides guidelines for representation of devices on diagrams and drawings in a standardized manner. It may be downloaded at no charge, and a hard copy or electronic copy purchased for $75.

NEMA’s annual meeting, call the Illuminations Weekend

, is

—Edited by Mark T. Hoske, editor in chief

Control Engineering News Desk


( Register here and scroll down to select your choice of eNewsletters free .)





No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.