Success in energy management starts with setting goals

Setting goals is easy; reaching them often proves much more difficult.

02/15/2013


Control Engineering cover, Industrial Energy Management, special section, February 2013Just ask one of the many people who already have broken New Year’s resolutions made barely a month ago. It’s a good bet that many of those folks didn’t really understand what it would take to make a major lifestyle change. 

No matter how devoted you are to completing a task, you’ll never succeed without knowing the proper steps to take to get the job done. 

When Control Engineering started publishing these Industrial Energy Management supplements, the goal was to spread at least a modicum of knowledge of what it will take for manufacturers to cut their overall energy use without negatively affecting critical metrics like production efficiency and product quality.

We knew that was a major challenge, largely because energy management is not a narrowly focused discipline. It touches every facet of a manufacturing enterprise—from monitoring the lighting, heating and cooling systems in the front office to making strategic decisions about allocating power to production equipment.  

The stories, in particular, shows how challenging it can be for a manufacturer to devise a truly comprehensive energy management program. It requires keeping a close eye on a host of moving parts, many of which are not always easy to see. 

Mission accomplished

For instance, our cover story is a case study on Steelcase, a 100-year-old company that leads the way in designing stylish yet functional office furniture. As Steelcase approached its centennial, its management realized that not only was the company not using energy as efficiently as it could, but its methods of tracking energy use were antiquated. That didn't just look bad for a company known for product innovation; it was unnecessarily expensive. So, Steelcase management set a goal to reduce energy use by 15% and shrink its carbon footprint by 25%, all in the five years leading up to the company’s 100th anniversary in 2012. With the help of a new automation and control platform Steelcase met those goals and continues to improve upon them. 

We also have an article about one of those energy-management moving parts that can be difficult to see. It's fairly common knowledge that variable frequency drives (VFD) can aid energy management strategies by constantly calibrate motors to operate only as fast as necessary to perform a specific task at a given time. This not only cuts down on the amount of energy a motor consumes, it also extends the motor’s life by reducing wear and tear. 

It may not be readily apparent, however, that that selecting the right VFD components is crucial to maximizing the energy-saving properties of VFDs. Read the article starting to learn why it's important to choose the right VFD cables. There’s also a short checklist on how to make the proper cable selection for a specific application. 

The third article should encourage anyone who’s waiting for the full rollout of the Smart Grid. It’s a Q&A with Brian MacCleery, principal product manager for clean energy technology with National Instruments. He is talking about a new development platform that should ease the process of designing devices that can be tied to the Smart Grid.

This issue does, indeed, cover a gamut of energy-management topics. We expect to continue doing so in the future. Again, our goal also is to pass on some useful knowledge in the process. 

This article appeared in the February 2013 Industrial Energy Management special section to Control Engineering, CFE Media.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.