Surge suppressor kit for explosion-proof applications

Moore Industries' surge suppressor kit is now available for use with field-installed instruments enclosed in BH and SB housings and provides 3kA of surge protection stopping failures due to lightning, spikes, and overvoltage surges while minimizing other electrical noise.

By Moore Industries June 3, 2016

Moore Industries’ surge suppressor kit is available for use with field-installed instruments enclosed in BH and SB housings and is approved for use in explosion-proof applications. The surge suppressor provides 3kA (8/20μsec) of surge protection stopping failures due to lightning, spikes, and overvoltage surges while minimizing other electrical noise. This suppressor is designed to allow Hart signals to pass through. It can be used to suppress or protect both analog and Hart digital/analog signal lines. This surge suppressor can be used with Moore Industries’ temperature and signal transmitters, signal isolators and signal converters and is easy to install and wire. 

Moore Industries

Signal Conditioners | Temp Sensors & Transmitters | Moore Industries 

– Edited by CFE Media. See more Control Engineering energy and power products