Taking safety measures to prevent a Black Swan event

A Black Swan event is a case in which an unpredicted, rare event occurs. John Murphy, a safety professional with Process Safety Services, said a strong, robust process safety management system will minimize the potential impact.


How can you predict the unpredictable? While that may seem like a question for a philosophy class, there is a basis of reality to it: safety professionals need to tackle issues that arise and could lead to a disaster. That is what a Black Swan is all about.

"A Black Swan is an unpredicted event that is rare and unpredictable," said John Murphy, a safety professional with Process Safety Services and formerly with Dow Chemical, during his talk at the 2016 AIChE Spring Meeting and 12th global congress on process safety entitled, "Surviving the Black Swan, Strategies for Process Safety Specialists and Companies to Survive Unpredictable Catastrophic Events."

"Black Swans lie outside the realm of regular expectations and carry extreme impact," he said. "They are unpredictable, but after analysis, they become more predictable. Some individuals and companies survive Black Swan events and continue on while others do not. I have learned that many Black Swan events, although initially viewed as catastrophes, can result in opportunities from a process safety improvement, career, and personal perspective."

The first such Black Swan incident was at the Dow Chemical incident in Freeport, Texas, on December 12, 1966. Two operators and a truck driver died when propargyl bromide and chloropicrin ended up blended with a mixture of dichloropropane and dichlorpropene in a tank car when one tank car exploded causing another tank car to explode.

The combined explosions left a crater 87 ft long by 60 ft wide and 11 ft deep. Officials estimated the energy released was between 5.5 and 14 tons of TNT. The technical cause of the incident was the mixing of chemicals in equipment not designed for the process and likely a pump running dry and hot.

"Dow survived this Black Swan because it determined that a root cause of the incident was a lack of a management system that required all new chemistry and changes to chemistry end up reviewed for reactive hazards and appropriate safeguards be implemented to prevent incidents," Murphy said. "Dow's Board of Directors at the time established the Reactive Chemical Program which addressed this issue to prevent future incidents. The program is part of the Dow Chemical's process safety program and continues to have support by top management demonstrating Dow's commitment to a strong, positive process safety culture. Dow's business model at the time required a commitment to research and development. I believe the implementation of the reactive chemical program at Dow was necessary for the survival of Dow's business model that included this commitment to research and development."

Second Black Swan incident

The second Black Swan incident was the Union Carbide disaster in Bhopal, India. On December 3, 1984, the accidental release of 40 metric tons of methyl isocyanate resulted in over 2,000 fatalities, 100,000 injuries, and significant damage to livestock and vegetation.

"Prior to this incident, a massive release of acutely toxic material that could result in such a catastrophe was not thought as possible," Murphy said. This event resulted in 17 chemical and petroleum companies creating the AIChE Center for Chemical Process Safety (CCPS) in 1985.

Union Carbide did not survive the Black Swan of Bhopal, but the chemical industry did with the creation of CCPS, Murphy said. Through CCPS, Bhopal has had a very positive impact on process safety from an industry, company, and personal perspective.

"Black Swans are rare events, but they happen with surprising frequency," Murphy said. "It is possible to ward off a disaster if a manufacturer continues to use hazard identification. A strong, robust process safety management system will minimize the impact. Companies and individuals should be aware of warning signs so you can avoid them."

Gregory Hale is the editor and founder of Industrial Safety and Security Source (ISSSource.com), a news and information Website covering safety and security issues in the manufacturing automation sector. This content originally appeared on ISSSource.com. Edited by Chris Vavra, production editor, CFE Media, Control Engineeringcvavra@cfemedia.com.

ONLINE extra

See additional stories from ISSSource about safety below.

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Big Data and IIoT value; Monitoring Big Data; Robotics safety standards and programming; Learning about PID
Motor specification guidelines; Understanding multivariable control; Improving a safety instrumented system; 2017 Engineers' Choice Award Winners
Selecting the best controller from several viewpoints; System integrator advice for the IIoT; TSN and real-time Ethernet; Questions to ask when selecting a VFD; Action items for an aging PLC/DCS
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
click me