Temperature controllers losing ground to DCSs, PCs and PLCs

Natick, MA—New implementations of industrial temperature control loops by electronic temperature controllers are expected to decline through 2005, even though some growth opportunities remain, according to a new study,'The Global Market For Industrial Electronic Temperature Controllers, 8th Edition,' by Venture Development Corp. (VDC).


Natick, MA— New implementations of industrial temperature control loops by electronic temperature controllers are expected to decline through 2005, even though some growth opportunities remain, according to a new study, 'The Global Market For Industrial Electronic Temperature Controllers, 8th Edition,' by Venture Development Corp. (VDC)

A survey of end-users, OEMs, and systems integrators found they are looking increasingly toward implementing temperature control loops in programmable logic controllers (PLCs), distributed control systems (DCSs), and personal computers (PCs). The ongoing evolution of temperature controls has been from manual control, to mechanical and electromechanical thermostats, to electronic controllers, to implementation in higher-level multi-functional machine and process controllers using PLCs, PCs and DCSs.

This trend is continuing today. More business becomes available to electronic temperature controller suppliers as more users automate processes and seek more features and performance than is available from the use of thermostats. Likewise as users seek to obtain more features and functions, and better overall integration of controls, there is electronic temperature controller business lost to suppliers of PLCs, PCs and DCSs.

Among the users participating in its survey, VDC found that:

  • Expectations that PLCs will gain the most share of new temperature control loops implementations through 2005. However, this was not found to be true for all industries and applications. For some, the larger gains are expected in implementations with PCs, and DCSs.

  • New implementations with electronic temperature controllers in all the industry and application segments are expected to decline. Among the end-users, the largest decline is expected among those in the pulp and paper industry, with the least decline expected among those in the food & beverage industry. Among the OEMs and systems integrators, the largest decline is expected among those supplying HVAC equipment, and the lowest decline expected among those sup-plying heat-treating equipment.

  • Despite the expected decline of temperature controller shares of new control loop implementations, these are expected to still account for the largest share of shipments in most all the industries and applications covered in the study through 2005.

VDC adds that these findings and other investigations led it to forecast slow positive growth for the overall global temperature controller market through 2005. Helping to sustain this growth is the large installed base, resulting in many purchases as spares and replacements.

Looking beyond the overall market, growth expectations are varied by product types and applications. For each application and user, different levels of control are needed. It is important for vendors to understand the level of control desired for the applications they hope to serve. In each case, the threat of alternative means of control is different.

VDC adds that there are many applications where use of alternative temperature control means will not be considered because use of PLCs, PCs, and DCSs for other control functions are not warranted. Vendors of electronic temperature controllers should certainly concentrate on these applications.

Competing for the temperature control loop business in systems where there are PLCs, PCs and DCSs will become increasingly difficult. Price, performance and ease of use appear key to capturing this business by electronic temperature controller suppliers. Thus, electronic temperature controller vendors must strive to reduce prices, provide better performance, with more options for users, and which are easy to install, configure/program, use and maintain. Ease of interfacing the temperature controllers with popular PLCs, PCs, and DCSs over appropriate communication bus/networks will aid in this effort.

Some users prefer or require back-up temperature controls, even where the primary implementation may be in PCSs, PCs and DCSs. Vendors should also seek out these applications.

'PLCs, DCSs and PCs are beginning to be used more in the implementation of temperature control loops,' says VDC analyst Jake Millette, VDC's analyst. 'However, they are far from overtaking temperature controllers as the preferred type of hardware in most applications. Opportunities for growth remain for suppliers with the correct mix of product, technology and application.'

Control Engineering Daily News Desk
Jim Montague, news editor

No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
The System Integrator Giants program lists the top 100 system integrators among companies listed in CFE Media's Global System Integrator Database.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
This eGuide illustrates solutions, applications and benefits of machine vision systems.
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Additive manufacturing benefits; HMI and sensor tips; System integrator advice; Innovations from the industry
Robotic safety, collaboration, standards; DCS migration tips; IT/OT convergence; 2017 Control Engineering Salary and Career Survey
Integrated mobility; Artificial intelligence; Predictive motion control; Sensors and control system inputs; Asset Management; Cybersecurity
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This article collection contains several articles on how automation and controls are helping human-machine interface (HMI) hardware and software advance.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Jose S. Vasquez, Jr.
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me