Temperature measurement and monitoring systems for automotive brake applications
Tecat Performance Systems' Wiser TC2-K family of temperature measurement and monitoring systems are designed for automotive brake rotors and ideal for mounting inside wheel hubs.
Tecat Performance Systems' Wiser TC2-K family of temperature measurement and monitoring systems are designed for automotive brake rotors and ideal for mounting inside wheel hubs. The Wiser TC2-K is comprised of three subsystems: a remote unit, base unit, and software interface. The remote unit consists of the data capture electronics connected to two K-type thermocouples, a transceiver, and a long-life battery. A custom-designed mounting plate allows for installation in any specific wheel hub or application. The base unit, which houses an antenna and receiver, plugs directly into a PC USB port for use with the software interface, or into a power supply and data acquisition system via its four analog outputs. The data viewer software is used for system configuration and calibration, live monitoring, and data logging. Low power consumption enables long battery life for uninterrupted testing, while a noninvasive design allows the unit to be removed without altering the unit under test. For extreme wheel hub environments, the system provides accuracy of ± 1°C over an operating temperature range of -40 to 1000 °C.
Tecat Performance Systems
- Edited by CFE Media. See more Control Engineering process sensor and actuator products.