Ten Hints for Successful Team Leadership, Part 1

If you find yourself in a new leadership position and would like a little help, here are some very practical ideas.

05/22/2012


They say that some are born to lead, but to paraphrase Mr. Orwell’s wonderful line from “Animal Farm,” “Some leaders are more born than others.” Here are some suggestions of things you can do should you find yourself in a project or team leadership position that will make the experience an enjoyable one for you and your team.

 

1. Get the big picture. While it may be impossible to be cognizant of all of the details of your project(s), maintain a clear understanding of the scope, major tasks, technologies, and issues involved in the project so that you can offer constructive advice and guidance to your team. If your eyes glaze over while we ask a question, you are not helpful.

 

2. Provide shelter for your team. When upper management asks for estimates, schedules, resource allocation schemes, and other information, don’t just forward the request to the team and ask, “Hey, guys, what do you think? Can you give me some numbers on this?” Develop your best estimate and then ask for review by the team. They’re busy making the project happen. After all, if you are asking your team to do what is essentially your job, what do they need you for?

 

3. Have respect. I was once asked by a manager, “Why don’t you respect me?” The answer, upon reflection, is twofold: First, respect is earned, not given, and second, respect is always a two-way street. How can you show respect for your team? Here are some suggestions:

 

a. Avoid micromanaging. If you know the habits of your team, you will know, for instance, who keeps good notes and issues meeting minutes as a matter of course. You do not have to ask to have these sent out five minutes after the meeting is over. If, after a reasonable time, the information is not forthcoming, then ask for it. Or simply confirm that the person’s usual procedure will be followed.

 

b. Don’t put your people on the spot. If, during a team meeting, someone is uncomfortable making a commitment to a schedule or deliverable, or reluctant to give an explanation, don’t let him or her twist in the wind. Table the issue for later discussion and move the meeting forward. There may be issues involved that should not be discussed in front of the entire team.

 

c. Be concise. Ask specific questions. Avoid questions that start with, “Shouldn’t we,” “Maybe we,” “What if,” or, “Don’t you think,” etc. This usually indicates that you have not thought the issue through and are fishing, or you’re trying to drive people to your viewpoint. Formulate a plan or idea, then present it to the team for discussion.

 

d. Let others talk. Listen carefully and try not to interrupt until your team members have had their say.

 

e. Listen and remember. If you are repeatedly asking the same questions, either you are not listening, or you are asking the wrong questions.

 

4. Follow through. If you personally decide to take on a task, promise a deliverable, a completion date, or critical decision, make it happen. Don’t wait a few days or weeks and then dump the task back onto the team. Precious time will have been lost.

 

See Part 2 with hints 5-10. http://www.controleng.com/blogs/real-world-engineering/blog/ten-hints-for-successful-team-leadership-part-2/78922e3c2e6e3d862f801493a6bcee72.html

 

Also read Technical Lead as Mentor.

 

This post was written by the control engineering team at MAVERICK Technologies, a leading system integrator providing industrial automation, operational support and control systems engineering services in the manufacturing and process industries. MAVERICK delivers expertise and consulting in a wide variety of areas including industrial automation controls, distributed control systems, manufacturing execution systems, operational strategy, and business process optimization. The company provides a full range of automation and controls services – ranging from PID controller tuning and HMI programming to serving as a main automation contractor. Additionally MAVERICK offers industrial and technical staffing services, placing on-site automation, instrumentation and controls engineers. 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.