The sky is not falling

Current economic conditions are making some engineers believe that the end is near, and the sky is falling. From where I'm sitting, the sky is definitely not falling.

04/14/2011


Recently, a few disgruntled engineers tried to convince me that the end is near. No, they’re not looking at the Mayan calendar. They’re looking at how their jobs are changing, and how the industry may be pushing them out of a job.

A couple of weeks ago, an electrical engineer having a really bad day confided in me that he was worried about his job—and the industry as a whole—changing. He feared that his job would soon become obsolete because suppliers would offer ready-made solutions that required little or no understanding of engineering principles. He believed that suppliers had already started this process, and it was just a matter of years before he wasn’t needed.

Here’s another example: A different engineer voiced his concern about lighting fixture manufacturers who aren’t accustomed to working with end users over the life of an LED fixture. In the case of LEDs, the fixture manufacturer is often the first point of contact with the end user or building owner. In other cases, it’s the electrical contractor. They don’t always continue that relationship though. He said that clients ask specifying engineers to replace lights with LED fixtures, which can be expensive to the client both short- and long-term.

So where does that leave engineers? The sky is not falling. Quite the contrary, actually. It leaves engineers in a sweet spot, allowing them to have a long-term relationship with the manufacturer, building owner, and client. The manufacturer may do a perfect job selling an off-the-shelf product, offering even more tools and options for the engineer to do a better job (case-in-point: BIM). And the building owner may be comfortable with selecting and maintaining a system, but it’s almost always the engineer who is called in to make it better.

Consulting engineers have the unique training and knowledge, thorough understanding of the codes, and ability to see the whole picture. We should be going to our clients—past and present—and ensuring their buildings are at the cutting edge of technology based on our strong relationships with manufacturers. Energy reduction is a buzzword these days, and building owners often are willing to spend a buck to save two. Just look at the advertisers in this publication; these companies are at the forefront of top-notch products.

My conversation with the concerned engineer ended on a positive note. I reminded him that commissioning systems and buildings would always be required. We chatted about the fact that one product might be easily selected and installed by an owner, but an entire system really needed an engineer’s touch.

So the end really isn’t near, and the sky isn’t falling. From where I’m sitting, this is just the beginning.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.