Thermoelectric cooling units receive NEMA certification

The ThermoTEC Class I, Division 2 Series of thermoelectric air conditioners by EIC Solutions received NEMA 4x certification, allow the air conditioner to be used with enclosures washdown and hazardous locations.

07/01/2013


The ThermoTEC Class I, Division 2 Series of thermoelectric air conditioners by EIC Solutions has received NEMA 4x certification, which allow them to be used in washdown and hazardous locations. Courtesy: EIC SolutionsEIC Solutions, Inc. has obtained NEMA 4X certification for the full line of the ThermoTEC Class I, Division 2 Series thermoelectric air conditioners for hazardous locations. The three thermoelectric cooler models—400, 800 and 1500 BTU—may now be used in washdown applications and are certified for use in Class I, Division 2 environments such as petroleum refineries, offshore drilling rigs, gasoline storage and dispensing areas, dry cleaning plants where vapors from cleaning fluids can be present, aircraft hangars, utility gas plants and others. The upgraded NEMA rating provides a significantly higher level of protection against corrosion and water ingress, including water coming from ice formation on the enclosure exterior. These units have previously been certified to meet Underwriters Laboratory UL STD 1604, UL STD 1995 and CAN/CSA C22.2 requirements.

EIC thermoelectric air conditioners for hazardous locations are available in either 120V AC or 240V AC modes, and operate in temperatures of up to 140°F. For installation into cabinets, a variety of options exist including heating capability, rain shrouds, digital temperature controllers and tamper resistant packages. Enclosures with cooling units may also be fitted with mounting feet, “drop-in” rack mount brackets, insulation or a polycarbonate view window.

EIC Solutions

www.eicsolutions.com 

- See more Control Engineering motor and drive products.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Learn how to increase device reliability in harsh environments and decrease unplanned system downtime.
This eGuide contains a series of articles and videos that considers theoretical and practical; immediate needs and a look into the future.
Learn how to create value with re-use; gain productivity with lean automation and connectivity, and optimize panel design and construction.
Go deep: Automation tackles offshore oil challenges; Ethernet advice; Wireless robotics; Product exclusives; Digital edition exclusives
Lost in the gray scale? How to get effective HMIs; Best practices: Integrate old and new wireless systems; Smart software, networks; Service provider certifications
Fixing PID: Part 2: Tweaking controller strategy; Machine safety networks; Salary survey and career advice; Smart I/O architecture; Product exclusives
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Look at the basics of industrial wireless technologies, wireless concepts, wireless standards, and wireless best practices with Daniel E. Capano of Diversified Technical Services Inc.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.

Find and connect with the most suitable service provider for your unique application. Start searching the Global System Integrator Database Now!

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.